Skip to product information
1 of 3

YCB141-M035

Brand: Yokogawa
Order Number: YCB141-M035
Type: V net Cable
Country:
Low stock: 15 left

Description

Caret Down

The Yokogawa YCB141-M035 is a 35 m V net coaxial cable specified for Yokogawa control-system communication networks. It belongs to the YCB141 10BASE-2 cable family and uses a 5 m increment ordering system for lengths above 10 m. Yokogawa documentation also identifies YCB141 as a V net or ER Bus cable for applicable systems.

Technical Specifications

Parameter Specification
Model YCB141-M035
Brand Yokogawa
Product Type V net Cable (10BASE-2 cable)
Cable Length 35 m
Cable Type Coaxial cable
Cable Length Increment 5 m for lengths above 10 m
Maximum Cable Length 185 m
Minimum Bending Radius 50 mm
Operating Temperature -20 to 70 deg C

Cable Configuration

The YCB141 series is specified by Yokogawa as a 10BASE-2 cable for V net. Although 10BASE-2 is used as the wire-size designation, Yokogawa explicitly notes that V net specifications differ from standard Ethernet specifications; the specified Yokogawa cable should therefore be used for the applicable V net configuration.

The -M035 suffix identifies a 35 m cable length. For this series, cable lengths above 10 m are ordered in 5 m increments, with -M185 representing the documented maximum 185 m length.

Routing and Installation Conditions

The documented minimum bending radius for YCB141 is 50 mm. The specified operating temperature range is -20 to 70 deg C, which should be considered when routing the cable inside cabinets or between system communication equipment.

Yokogawa identifies YCB141 as a V net or ER Bus cable used across applicable system configurations. The exact network role should therefore be determined from the control-system architecture and the associated system documentation rather than inferred solely from the cable model.

Frequently Asked Questions

Q: What does YCB141-M035 specify?

A: It specifies the YCB141 10BASE-2 coaxial cable with a nominal cable length of 35 m. The M035 code follows Yokogawa's 5 m length increment for this range.

Q: Is YCB141-M035 a standard Ethernet 10BASE-2 cable?

A: No. Yokogawa uses "10BASE-2" to describe the cable type, but explicitly states that V net specifications differ from Ethernet specifications. The Yokogawa-specified YCB141 cable should be used for the applicable V net configuration. 

Q: What is the minimum bending radius?

A: The documented minimum bending radius is 50 mm. The cable should be routed without exceeding this mechanical limitation. 

 


Product Benefits

Caret Down

Reviews

Caret Down

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
View full details

Recommended products

Recently viewed product