Skip to product information
1 of 3

SNB10D-225/CU2T

Brand: Yokogawa
Order Number: SNB10D-225/CU2T
Type: Safety Node Unit
Country:
Low stock: 15 left

Description

Caret Down

The Yokogawa SNB10D-225/CU2T is a rack-mountable Safety Node Unit designed for the ProSafe-RS safety control system. It provides the node hardware for connecting field I/O modules to a Safety Control Unit (SCU) through the ESB bus. This configuration includes dual-redundant power supplies, a 220-240 V AC power input, and an ESB bus connector unit with an integrated terminator.

Technical Specifications

Parameter Specification
Model SNB10D-225/CU2T
Base Model SNB10D
Brand Yokogawa
Product Type Safety Node Unit
Mounting Type Rack Mountable
Power Supply Configuration Dual-redundant
Power Supply Voltage 220-240 V AC
Environmental Classification ISA Standard G3
Operating Temperature -20 to 70 deg C
ESB Bus Connector Unit CU2T
Connector Unit Part Number S9343FA
Bus Termination Integrated ESB bus terminator
Weight 5.9 kg

Power Supply and Node Configuration

The SNB10D uses a dual-redundant power supply arrangement. This configuration provides two power supply paths within the node unit, supporting the redundant power architecture of the safety system. The selected -2 suffix identifies the dual-redundant power supply configuration with a software license for node expansion (R3).

ESB Bus Interface

The safety node communicates with the Safety Control Unit through the ESB bus. The ESB interface transfers field I/O information between the node and the safety controller, while the node provides the hardware platform and power distribution for its installed I/O modules.

The /CU2T option specifies a Connector Unit with Terminator for the ESB bus, part number S9343FA. The integrated termination function distinguishes this configuration from /CU2N, which specifies a connector unit without the terminator.

Model and Suffix Code Identification

The complete ordering designation identifies the following configuration:

Code Specification
SNB10D Safety Node Unit, rack-mountable type
-2 Dual-redundant power supply with software license for node expansion (R3)
2 220-240 V AC power supply
5 ISA Standard G3, -20 to 70 deg C, without explosion protection
/CU2T ESB bus Connector Unit with Terminator, S9343FA

The /CU2T option is particularly important when identifying the required ESB bus connection hardware. It should not be treated as interchangeable with /CU2N without checking the intended bus configuration.

Installation and Configuration Notes

  • The unit is designed for 19-inch rack mounting and uses four M5 mounting screws with insulating bushes.
  • A keyed metallic cabinet is specified for rack-mounted equipment to meet the applicable safety and EMC installation requirements.
  • The ESB bus connection to the Safety Control Unit requires a YCB301 cable of at least 1 m.
  • I/O module quantity and slot-position restrictions must be checked against the applicable Yokogawa mounting specifications.

Frequently Asked Questions

Q: What is the function of the Yokogawa SNB10D-225/CU2T?

A: It provides the rack-mounted node hardware for interfacing field I/O modules with a ProSafe-RS Safety Control Unit through the ESB bus. It also supplies power to the installed I/O modules.

Q: What is the difference between CU2T and CU2N?

A: CU2T includes an ESB bus terminator and uses connector unit part number S9343FA. CU2N is the connector unit without the specified terminator and uses part number S9342FA.

Q: Can SNB10D-225/CU2T be used in an explosion-protected installation?

A: This particular -225 configuration specifies ISA Standard G3 environmental classification without explosion protection. It should not be selected as an explosion-protected version.


Product Benefits

Caret Down

Reviews

Caret Down

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
View full details

Recommended products

Recently viewed product