Skip to product information
1 of 3

SED2D-01

Brand: Yokogawa
Order Number: SED2D-01
Type: Digital Terminal Board
Country:
Low stock: 15 left

Description

Caret Down

The Yokogawa SED2D-01 is a digital terminal board designed for single or dual-redundant configurations in the ProSafe-RS safety instrumented system. It provides the field wiring interface for SDV521 digital output modules, with four groups of four channels and dedicated AKB651 connection cables. The board uses M4 screw terminals for field connections.

Functional Description

The SED2D provides the electrical connection between field wiring and the digital output module. It organizes the field-side connections into four groups, each supporting four channels, for a total of 16 channel connections.

In the ProSafe-RS configuration, the terminal board connects to the SDV521 through an AKB651 cable. This arrangement separates field wiring from the I/O module connection and supports single or dual-redundant configurations, depending on the system arrangement.

Technical Specifications

Parameter Specification
Model SED2D-01
Brand Yokogawa
Product Type Digital Terminal Board
System ProSafe-RS
Configuration Single or dual-redundant
Number of Channels 4 channels x 4
Compatible I/O Module SDV521
Connection Cable AKB651
Field Terminals M4 screw terminals
Mounting Type 19-inch rack mountable
Safety Integrity Level SIL3 (terminal board alone)
Withstand Voltage 2000 V AC for 1 minute
Insulation Resistance 100 MOhm minimum at 500 V DC
Weight 2.3 kg

Electrical Isolation and Safety

The specified withstand voltage of 2000 V AC applies between individual signal terminals and between all signal terminals and the grounding terminal, for a test duration of one minute. The minimum insulation resistance is 100 MOhm when measured at 500 V DC.

Yokogawa specifies SIL3 for the SED2D terminal board itself. This rating should not be interpreted as an independent SIL3 certification of the complete safety instrumented function. The overall safety integrity depends on the complete system configuration and its safety assessment.

Maintenance Considerations

The SED2D terminal board uses fuse A1583EF, rated at 250 V / 15 A, according to the ProSafe-RS hardware maintenance documentation. Fuse replacement must follow the manufacturer's maintenance instructions. Do not insert or remove fuses while voltage is applied or current is flowing through the terminals.

Frequently Asked Questions

Q: Which I/O module connects to the SED2D-01?

A: The specified connection module for the SED2D terminal board is the SDV521 digital output module. The connection is made using an AKB651 cable.

Q: Does the SED2D-01 support redundant configurations?

A: Yes. The SED2D hardware is designed for both single and dual-redundant configurations. The actual arrangement depends on the number of terminal board connections and the corresponding system architecture.

Q: Does the SIL3 rating apply to the entire ProSafe-RS system?

A: No. The SIL3 specification listed for SED2D refers to the terminal board alone. System-level SIL capability must be evaluated against the complete safety system configuration.


Product Benefits

Caret Down

Reviews

Caret Down

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
View full details

Recommended products

Recently viewed product