Skip to product information
1 of 3

SARM15A-000

Brand: Yokogawa
Order Number: SARM15A-000
Type: Mechanical Relay Input Board
Country:
Low stock: 15 left

Description

Caret Down

The Yokogawa SARM15A-000 is identified as a mechanical relay input board for industrial control system signal interfacing. The corresponding Yokogawa ARM15A technical specification describes a 32-point contact input arrangement for acquiring field contact signals and routing them to digital input modules. Its design includes M4 field terminals and external 24 V DC power connections.

Functional Description

The board provides an interface between external mechanical contacts and the control system's digital input modules. It supports 32 contact points and can be configured for single or dual-redundant contact input arrangements.

Each input is evaluated according to the resistance of the external contact circuit:

  • ON state: Contact resistance of 150 ohms or less.
  • OFF state: Contact resistance of at least 200 kohms.

This resistance-based input arrangement allows field switches and relay contacts to be monitored as discrete status signals.

Field Connections and Power Supply

The field devices connect through M4 screw terminals. The board requires external 24 V DC power for its internal circuitry and field-device contact supply.

The field-device supply uses a dual-line arrangement, with power distributed across groups of 16 contact points. This arrangement should be considered when planning external power distribution and field wiring.

Compatible I/O Configuration

The Yokogawa ARM15A technical specification identifies the following associated digital input modules and signal cables:

  • ADV151: 32-point digital input module, used with the ATD5A terminal block.
  • ADV161: 64-point digital input module.
  • AKB331: Signal cable for 32-point connections.
  • AKB337: Signal cable for 64-point connections.

For one ADV161, the specified configuration requires two relay boards and two AKB337 signal cables. Confirm the exact hardware configuration against the installed FIO system before replacement.

Technical Specifications

Parameter Specification
Model SARM15A-000
Brand Yokogawa
Product Type Mechanical Relay Input Board
Contact Points 32
Input Configuration Single / Dual-redundant
ON Signal 150 ohms or less
OFF Signal At least 200 kohms
Field Device Terminals M4 screws
External Contact Rating 24 V DC, 13 mA minimum load
Internal Circuit Supply 24 V DC
Internal Circuit Current Max. 0.32 A
Field Device Supply Dual-line, 24 V DC
Field Supply Current Max. 0.3 A per line
Insulation Resistance At least 10 Mohms at 500 V DC
Withstanding Voltage 1.5 kV AC (field terminals to case); 500 V AC (power terminals to case); 1.5 kV AC (power terminals to field terminals)
Operating Temperature 0 to 50 deg C
Ambient Humidity 10 to 90 %RH
Dimensions 482.6 mm (W) x 132.5 mm (H), 3U
Weight 2.2 kg

Frequently Asked Questions

Q: What type of field signals does the SARM15A-000 handle?

A: It is specified for mechanical relay contact input. Field contact status is distinguished by resistance thresholds: 150 ohms or less for ON and at least 200 kohms for OFF.

Q: Which Yokogawa digital input modules are associated with this relay board?

A: The ARM15A specification identifies ADV151 and ADV161. The corresponding signal cables are AKB331 and AKB337, respectively, subject to the specified channel configuration.

Q: Does the board require an external power supply?

A: Yes. The specified configuration requires 24 V DC for the internal circuit and a separate field-device contact supply arrangement. The maximum internal circuit current is 0.32 A, while each field supply line supports up to 0.3 A.


Product Benefits

Caret Down

Reviews

Caret Down

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
View full details

Recommended products

Recently viewed product