Skip to product information
1 of 3

NFTR8S-10

Brand: Yokogawa
Order Number: NFTR8S-10
Type: RTD Pressure Clamp Terminal Block
Country:
Low stock: 15 left

Description

Caret Down

The Yokogawa NFTR8S-10 is a pressure clamp terminal block designed for RTD (Resistance Temperature Detector) signal connections in the Yokogawa STARDOM I/O system. It provides 12-channel field wiring termination and incorporates surge absorbers to protect connected signal circuits against electrical surge disturbances. It is the terminal block specified for the NFAR181 RTD input module.

Function and Signal Connection

The NFTR8S-10 provides the field wiring interface between RTD sensors and the associated RTD input module. It terminates sensor conductors through pressure clamp connections, allowing temperature measurement signals to be routed to the controller's input channels.

The terminal block is a passive connection component rather than an independent temperature measurement module. RTD signal acquisition and conversion are performed by the associated input module.

Surge Protection

The NFTR8S-10 includes built-in surge absorbers. This distinguishes it from the NFTR8S-00, which is the corresponding RTD pressure clamp terminal block without surge absorbers. The surge protection configuration should be considered when identifying replacement parts or checking an existing I/O assembly.

Technical Specifications

Parameter Specification
Model NFTR8S-10
Brand Yokogawa
Product Type RTD Pressure Clamp Terminal Block
System STARDOM FCN/FCJ
Signal Type RTD
Connecting Channels 12
Compatible I/O Module NFAR181
Surge Protection Built-in surge absorber
Surge Discharge Current 25 A (8/20 us)
EMC Standard EN 61000-6-2:1999
Weight 0.2 kg
Dimensions (W x H x D) 32.6 x 114 x 60.5 mm

Model Identification and Selection

The NFTR8S terminal block is available in two surge protection configurations:

  • NFTR8S-00: RTD pressure clamp terminal block without surge absorber.
  • NFTR8S-10: RTD pressure clamp terminal block with surge absorber.

The suffix distinction is important when replacing an existing terminal block. Both configurations serve the 12-channel NFAR181 RTD input module, but they differ in their surge protection provision.

Frequently Asked Questions

Q: Is the NFTR8S-10 an RTD input module?

A: No. It is a field wiring terminal block. The NFAR181 performs RTD signal acquisition, while the NFTR8S-10 provides the sensor connection interface.

Q: What is the difference between NFTR8S-10 and NFTR8S-00?

A: The NFTR8S-10 incorporates surge absorbers, whereas the NFTR8S-00 does not. They have the same RTD terminal block application and 12-channel connection specification.

Q: Which input module is specified for the NFTR8S-10?

A: The Yokogawa NFAR181 RTD input module is the specified associated module. Verify the existing terminal block configuration before ordering a replacement.


Product Benefits

Caret Down

Reviews

Caret Down

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
View full details

Recommended products

Recently viewed product