NFTP5S-00
Description
Description
The Yokogawa NFTP5S-00, also identified as the NFTP5S-00 Pressure Clamp Terminal Block, is a field wiring interface component designed to connect external field conductors with industrial I/O circuits. Its pressure-clamp connection arrangement provides mechanical conductor retention and electrical contact for control signal wiring. The terminal block is identified in third-party product listings as a Yokogawa pressure clamp terminal assembly.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | NFTP5S-00 |
| Brand | Yokogawa |
| Product Type | Pressure Clamp Terminal Block |
| Weight | 0.5 kg |
| Dimensions | 185 x 100 x 40 mm |
| Operating Temp | -20 to 60 deg C |
| Connection Method | Pressure clamp terminals |
| Primary Function | Field wiring termination |
Field Wiring Interface and Signal Integrity
The NFTP5S-00 provides a mechanical and electrical termination point between field conductors and the associated control-system wiring interface.
The pressure-clamp arrangement retains conductors through contact pressure rather than relying solely on conventional screw-terminal fastening. Correct conductor preparation and insertion are necessary to maintain contact quality.
For DCS and process-control installations, channel assignment, conductor polarity, terminal identification, and the associated I/O module wiring diagram must be checked before commissioning.
Channel-to-channel isolation and surge protection characteristics should not be assumed without the applicable Yokogawa hardware documentation.
Frequently Asked Questions (FAQ)
Q: Can the NFTP5S-00 be replaced while the control system is energized?
A: Hot-swap capability has not been verified. Isolate the associated circuits and follow the system maintenance procedure before removing or replacing the terminal block.
Q: Does the NFTP5S-00 require an independent power supply?
A: No independent power consumption specification has been verified. Its electrical requirements should be checked against the associated I/O hardware documentation.
Q: Can this terminal block be used with any Yokogawa I/O module?
A: Compatibility should not be assumed across Yokogawa product families. Confirm the terminal block part number against the applicable I/O module and system hardware configuration.
Field Installation Guidelines
1. Mechanical Mounting: Check the terminal block mounting arrangement and ensure that the assembly is secured to the designated panel or mounting structure.
2. Conductor Preparation: Prepare field conductors according to the applicable terminal specifications. Avoid damaged insulation, exposed excess conductor, and loose wire strands.
3. Signal Wiring: Verify terminal numbering, signal polarity, and field-device identification against the approved wiring diagram.
4. Cable Routing: Separate low-level instrumentation signals from power cables and high-current switching conductors to reduce electromagnetic interference.
5. Shield Grounding: Terminate cable shields according to the system grounding design. Avoid creating unintended ground loops.
6. Commissioning: Inspect conductor retention, terminal identification, and wiring continuity before energizing the associated I/O circuits.
Product Benefits
Product Benefits
- 100% genuine products in stock with fast delivery. Learn more...
- 30-day return policy for quality assurance. Learn more...
- 12-month warranty for peace of mind. Learn more...
Reviews
Reviews

Have a question?
Notified by email when this product becomes available
Recommended products
Recently viewed product
Subscribeto our emails
Be the first to know about new collections and exclusive offers.