Skip to product information
1 of 3

NFSBT02

Brand: Yokogawa
Order Number: NFSBT02
Type: SB Bus T-Joint with Built-in Terminator
Country:
Low stock: 15 left

Description

Caret Down

The Yokogawa NFSBT02 is an SB Bus T-joint with a built-in terminator, used in Yokogawa FCN autonomous controller systems. It provides a branch connection for the SB Bus and incorporates the termination function required at designated bus endpoints. It is a physical bus connection accessory rather than an I/O module or standalone communication controller.

Function and Bus Configuration

The NFSBT02 connects SB Bus sections through the dedicated SB Bus interface used with the NFSB100 SB Bus Repeat Module. Its integrated terminator provides the required electrical termination at the ends of the bus connection.

Yokogawa identifies two T-joint models for this configuration:

  • NFSBT01: SB Bus T-joint without a built-in terminator.
  • NFSBT02: SB Bus T-joint with a built-in terminator.

These models serve different termination requirements and should not be treated as interchangeable without checking the bus layout.

SB Bus Connection Requirements

The NFSBT02 is used with the NFSB100 SB Bus Repeat Module and the dedicated NFCB301 SB Bus Cable. The cable is available in lengths of 0.3 m, 1 m, 2 m, 4 m and 8 m, depending on the ordering suffix.

For an SB Bus extension arrangement, Yokogawa specifies a T-joint with a built-in terminator at each end of the bus connection. The NFSBT02 therefore serves a defined termination position rather than acting as a general-purpose bus splitter.

Technical Specifications

Parameter Specification
Model NFSBT02
Brand Yokogawa
Product Type SB Bus T-joint with Built-in Terminator
Product Series STARDOM
Bus Interface SB Bus
Termination Built-in terminator
Compatible Bus Connection Component NFSB100 SB Bus Repeat Module
Dedicated Bus Cable NFCB301
Dimensions (H x W x D) 112 x 32.6 x 24.2 mm
Weight 0.1 kg

Mechanical Design

The NFSBT02 has a compact vertical housing with dedicated mounting and connector features. Its dimensions and weight are documented in Yokogawa drawing SD 34P02Q12-05E. The integrated termination distinguishes its physical configuration from the NFSBT01 T-joint.

Frequently Asked Questions

Q: What is the difference between Yokogawa NFSBT01 and NFSBT02?

A: Both are SB Bus T-joints. The NFSBT01 does not include a built-in terminator, whereas the NFSBT02 incorporates one for bus-end termination.

Q: Which cable is used with the NFSBT02?

A: The associated SB Bus cable is the Yokogawa NFCB301. Available cable lengths range from 0.3 m to 8 m, selected through the cable ordering suffix.

Q: Is the NFSBT02 an SB Bus Repeat Module?

A: No. The NFSBT02 is a T-joint with a built-in terminator. The NFSB100 is the separate SB Bus Repeat Module responsible for connecting the control unit to I/O extension units.


Product Benefits

Caret Down

Reviews

Caret Down

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
View full details

Recommended products

Recently viewed product