Skip to product information
1 of 3

NFSB100-500/SBT01

Brand: Yokogawa
Order Number: NFSB100-500/SBT01
Type: SB Bus Repeat Module
Country:
Low stock: 15 left

Description

Caret Down

The Yokogawa NFSB100-500/SBT01 is an SB Bus Repeat Module designed for the FCN modular controller system. It connects a control unit to I/O extension units, extending the SB bus for distributed I/O expansion. The module supports redundant SB bus configurations and includes an SB bus T-joint under the /SBT01 option.

Functional Description

The NFSB100 extends the FCN local SB bus between the control unit and its I/O extension units. It uses serial communication at 128 Mbps, providing the communication path for data exchange between the controller and the connected expansion units.

A single SB bus configuration uses one repeat module in the designated slot. For a duplexed SB bus, two repeat modules are installed in each applicable unit, with dedicated SB bus cables and T-joints connecting the communication paths.

Communication and Configuration

  • Supports connection of up to 2 I/O extension units, with a maximum of 3 units including the control unit.
  • Maximum transmission distance is 8 m per SB bus line.
  • Supports single and duplexed SB bus configurations.
  • Occupies one module slot.
  • Uses dedicated NFCB301 SB bus cables for interconnection.

The communication distance and extension-unit limit should be considered when planning the physical layout of an FCN controller installation.

Parameter | Specification

Parameter Specification
Model NFSB100-500/SBT01
Brand Yokogawa
Product Type SB Bus Repeat Module
Applicable System FCN
Transmission Method Serial communication
Transmission Rate 128 Mbps
Maximum Transmission Distance 8 m per line
Maximum Extension Units 2 (3 units including control unit)
Bus Configuration Single / Duplex
Supply Voltage 5 V DC +/-5%
Current Consumption 500 mA maximum
Slot Occupancy 1 slot
Installation Slot Slot 10 (single bus); Slots 9 and 10 (duplexed bus)
Dimensions (W x H x D) 32.8 x 130 x 142.5 mm
Weight 0.2 kg
Included Option SB bus T-joint (/SBT01)

Status Indicators

The front panel provides three green LEDs for checking hardware and communication activity:

  • STATUS: Lights when the module hardware is operating normally.
  • SND: Lights during transmission.
  • RCV: Lights during reception.

These indicators help maintenance personnel distinguish normal hardware status from active transmit and receive operations when checking the SB bus connection.

Connection and Installation Requirements

The NFSB100 is designed for installation on the applicable FCN base module. The manufacturer's documentation specifies the NFBU200 long base module for this SB bus repeat module; it cannot be installed on the N2BU051/NFBU050 short base module or the N2BU030 compact base module.

When connecting the control unit and extension units, the SB bus requires appropriate T-joints and dedicated cables. The bus termination arrangement must follow the manufacturer's specified configuration, including terminators at both ends of the SB bus.

Frequently Asked Questions

Q: What is the function of the NFSB100-500/SBT01?

A: It extends the FCN controller's SB bus to connect I/O extension units. It provides the serial communication link between the control unit and the expansion units.

Q: Can the NFSB100 support a redundant SB bus?

A: Yes. A duplexed configuration requires two SB bus repeat modules in each applicable unit. The modules use separate SB bus communication paths connected through dedicated T-joints and cables.

Q: What is included in the /SBT01 configuration?

A: The /SBT01 option specifies an SB bus T-joint supplied with the module. It is different from /SBT02, which specifies a T-joint with a built-in terminator.


Product Benefits

Caret Down

Reviews

Caret Down

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
View full details

Recommended products

Recently viewed product