Skip to product information
1 of 3

ARM15A-000

Brand: Yokogawa
Order Number: ARM15A-000
Type: Mechanical Relay Input Board
Country:
Low stock: 15 left

Description

Caret Down

The Yokogawa ARM15A-000 is a 32-point mechanical relay board designed for dry-contact input interfacing in the FIO subsystem of the CENTUM VP control system. It connects field contact signals to digital input modules, with M4 screw terminals for field wiring. The board supports single and dual-redundant input configurations and uses an external 24 V DC supply for its internal circuitry and field-device circuits.

Functional Description

ARM15A provides an interface between field dry contacts and the FIO digital input system. It receives contact signals from field devices and transfers their states through the associated relay and input circuitry to the digital input module.

The board provides 32 contact input points. Its specified ON and OFF resistance thresholds define the conditions under which a field contact is recognized as closed or open. This distinction is useful when checking contact wiring and input signal compatibility.

Signal Interface and Module Configuration

The documented FIO configurations include:

  • ADV151: 32-point digital input module used with an ATD5A terminal block.
  • ADV161: 64-point digital input module.
  • AKB331: Signal cable for the 32-point configuration.
  • AKB337: Signal cable for the 64-point configuration.

For an ADV161 configuration, two ARM15A relay boards and two AKB337 signal cables are required. The board supports single or dual-redundant digital input arrangements, subject to the selected system configuration.

Power Supply and Contact Conditions

The internal circuit requires an external 24 V DC supply, with a maximum current consumption of 0.32 A. Field-device power is supplied through two separate lines, each serving 16 input points, with a maximum current of 0.3 A per line.

The contact input thresholds are ON at 150 ohms or less and OFF at 200 kohms or higher. These values define the documented contact-state recognition conditions; intermediate resistance values are not specified as valid ON or OFF states.

Technical Specifications

Parameter Specification
Model ARM15A-000
Brand Yokogawa
Product Type Mechanical Relay Contact Input Board
Contact Points 32 points
Input Type Dry-contact input
Field Terminals M4 screw terminals
ON Signal 150 ohms or less
OFF Signal 200 kohms or higher
External Contact Rating 24 V DC, 13 mA
Internal Circuit Supply 24 V DC
Internal Circuit Current Max. 0.32 A
Field Device Supply 24 V DC, dual-line
Field Supply Current Max. 0.3 A per line
Insulation Resistance At least 10 Mohms at 500 V DC
Withstand Voltage 1.5 kV AC between field terminals and case; 500 V AC between 24 V power terminals and case; 1.5 kV AC between power and field terminals
Operating Temperature 0 to 50 deg C
Relative Humidity 10 to 90% RH
Weight 2.2 kg

Frequently Asked Questions

Q: Which digital input modules are documented for the ARM15A-000?

A: The documented configurations include ADV151 with an ATD5A terminal block for 32-point input and ADV161 for 64-point input. The corresponding signal cable must also be selected according to the configuration.

Q: Can the ARM15A-000 support dual-redundant input configurations?

A: Yes. ARM15A is specified for single or dual-redundant mechanical relay contact input configurations. The required board and cable quantities depend on the selected digital input module.

Q: What power supply does the ARM15A-000 require?

A: The internal circuitry requires an external 24 V DC supply, with a maximum current consumption of 0.32 A. Field-device power is supplied separately through two 24 V DC lines, each serving 16 points.


Product Benefits

Caret Down

Reviews

Caret Down

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
View full details

Recommended products

Recently viewed product