Skip to product information
1 of 3

ANB11D-B25/BU2A

Brand: Yokogawa
Order Number: ANB11D-B25/BU2A
Type: Bus Interface Module
Country:
Low stock: 15 left

Description

Caret Down

The ANB11D-B25/BU2A is a Yokogawa Optical ESB Bus Node Unit designed for dual-redundant ESB communication in N-IO/FIO systems. It provides an interface between remote I/O modules and a Field Control Unit (FCU), using optical ESB bus transmission. This configuration specifies dual-redundant power supplies, a 5 km optical repeater arrangement, a 220-240 V AC power supply, and an ESB bus connector unit.

Functional Description

The ANB11D node unit accommodates power supply modules, bus interface modules, communication modules, optical ESB bus repeater modules, and I/O modules according to the configured system arrangement. It collects field I/O information at the remote node and transfers the data to the FCU through the optical ESB bus.

The dual-redundant ESB architecture provides two communication paths between the node and the control system. The optical repeater arrangement supports remote I/O communication over distances beyond conventional electrical bus connections.

Model Configuration

The complete ordering code identifies the node architecture, power supply arrangement, optical repeater configuration, and connector option.

  • -B: Dual-redundant power supply configuration for a 5 km optical repeater arrangement. The specified master-side equipment includes ANT411-□E, ANT411-□F, or the applicable A2EN501 configuration.
  • 2: 220-240 V AC power supply.
  • 5: Basic type without explosion protection.
  • /BU2A: Connector unit for ESB bus.

These codes identify the supplied configuration and should be retained when ordering replacement equipment.

Technical Specifications

Parameter Specification
Model ANB11D-B25/BU2A
Brand Yokogawa
Product Type Optical ESB Bus Node Unit
System Configuration Dual-redundant ESB bus
Optical Repeater Configuration 5 km
Power Supply Configuration Dual-redundant
Rated Power Supply 220-240 V AC
Explosion Protection Basic type, without explosion protection
Connector Option /BU2A - ESB bus connector unit
Applicable System N-IO/FIO

System Integration and Configuration Considerations

The ANB11D-B25/BU2A is intended for use as a remote node within a dual-redundant optical ESB bus architecture. Its optical communication arrangement must match the master-side equipment. The optical repeater and bus interface configuration should therefore be checked against the existing FCU and node arrangement before replacement.

Yokogawa specifies that the node unit must be installed in a keyed metallic cabinet to meet the applicable safety and EMC requirements. Cabinet temperature and fan monitoring require the corresponding HKU interface configuration; this is not included in the /BU2A option.

Frequently Asked Questions

Q: What is the difference between ANB11D and ANB10D?

A: ANB11D is a node unit for dual-redundant ESB communication with an optical repeater. ANB10D is designed for dual-redundant ESB bus communication without the optical repeater arrangement.

Q: Does ANB11D-B25/BU2A support a 50 km optical transmission distance?

A: No. The -B configuration specifies the 5 km optical repeater arrangement. The corresponding 50 km configuration uses the -D suffix code and requires the appropriate master-side equipment.

Q: Does /BU2A include an ESB bus termination resistor?

A: No. /BU2A identifies the ESB bus connector unit. The connector option with a termination resistor is /BU2B. These options should not be treated as interchangeable without checking the bus topology. 


Product Benefits

Caret Down

Reviews

Caret Down

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
View full details

Recommended products

Recently viewed product