ANB11D-B15/BU2A
Description
Description
The Yokogawa ANB11D-B15/BU2A is a node unit for Yokogawa's dual-redundant ESB Bus architecture, designed for N-IO and FIO systems. It provides an interface for optical ESB Bus communication and uses a dual-redundant power supply configuration for the 5 km optical repeater arrangement. The /BU2A option specifies an ESB Bus connector unit.
Functional Description
The ANB11D is used as a node unit in a dual-redundant ESB Bus system. It connects distributed I/O nodes to the control system through the ESB Bus architecture, allowing I/O equipment to be located separately from the field control unit (FCU).
The optical repeater arrangement supports communication over fiber-optic links. This configuration is relevant where electrical separation and distance between system nodes are part of the control system design.
Model Configuration
The ordering code identifies the main hardware configuration:
| Code | Specification |
|---|---|
| ANB11D | Node Unit for Dual-Redundant ESB Bus with Optical Repeater |
| -B | Dual-redundant power supply for 5 km optical repeater |
| 1 | 100-120 V AC power supply |
| 5 | Basic type without explosion protection |
| /BU2A | Connector unit for ESB Bus |
The -B configuration is specified for use with the applicable optical repeater master-side models, including ANT401-□E, ANT401-□F and A2EN501-□□1. The corresponding repeater arrangement must be checked against the system configuration before ordering.
Electrical and Hardware Configuration
The -B15 version uses a 100-120 V AC power supply at 50/60 Hz. The ANB11D architecture supports dual-redundant power supply modules, with two power supply modules installed for redundant operation. The power supply modules also provide power to the installed I/O modules and transmitters.
The node unit supports up to eight I/O modules. Its optical repeater slave configuration uses two ANT502 modules for the 5 km arrangement. These modules form the optical communication interface between the node unit and the corresponding master-side equipment.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | ANB11D-B15/BU2A |
| Brand | Yokogawa |
| Product Type | Optical ESB Bus Node Unit |
| System Application | N-IO / FIO |
| ESB Bus Configuration | Dual-redundant |
| Optical Repeater Configuration | 5 km |
| Power Supply | 100-120 V AC |
| Supply Frequency | 50/60 Hz |
| Power Consumption | 200 VA, 120 W |
| Power Supply Architecture | Dual-redundant |
| Maximum I/O Modules | 8 |
| Optical Repeater Slave Modules | ANT502, 2 modules |
| Connector Option | /BU2A - ESB Bus connector unit |
| Mounting Type | 19-inch rack mounting |
| Mounting Fasteners | M5 x 4 screws |
| Dimensions (W x H x D) | 482.6 x 221.5 x 205 mm |
| Weight | 10 kg |
| Explosion Protection | Basic type, without explosion protection |
web-material3.yokogawa.com
Installation and System Considerations
The ANB11D is designed for 19-inch rack mounting. The installation requires four M5 mounting screws, and an insulation bush is supplied as a standard accessory.
For compliance with the specified safety and EMC requirements, the unit must be installed in a keyed metallic cabinet. The number and allocation of I/O modules are subject to installation restrictions, including cabinet temperature conditions. Additional insulating partitions are required when modules with built-in barriers are installed in the node unit.
Frequently Asked Questions
Q: What is the difference between ANB11D-B15 and ANB11D-415?
A: Both are dual-redundant optical ESB Bus node configurations, but their repeater arrangements differ. The -B version is intended for the specified 5 km repeater configuration, while -4 specifies a 50 km repeater configuration for its applicable master-side models.
Q: Does ANB11D-B15/BU2A include an ESB Bus terminator?
A: No. The /BU2A option identifies the ESB Bus connector unit without specifying a terminator. The /BU2B option identifies a connector unit with a terminator.
Q: Which optical repeater modules are used for the 5 km configuration?
A: The ANB11D node unit uses two ANT502 optical ESB Bus repeater slave modules in a dual-redundant configuration. The corresponding master-side equipment must match the -B configuration, including the applicable ANT401 or A2EN501 models.
Product Benefits
Product Benefits
- 100% genuine products in stock with fast delivery. Learn more...
- 30-day return policy for quality assurance. Learn more...
- 12-month warranty for peace of mind. Learn more...
Reviews
Reviews

Have a question?
Notified by email when this product becomes available
Recommended products
Recently viewed product
Subscribeto our emails
Be the first to know about new collections and exclusive offers.