Skip to product information
1 of 3

ANB11D-215/BU2B

Brand: Yokogawa
Order Number: ANB11D-215/BU2B
Type: Dual-Redundant ESB Bus Node Unit
Country:
Low stock: 15 left

Description

Caret Down

The Yokogawa ANB11D-215/BU2B is a node unit for a dual-redundant ESB bus with an optical repeater, designed for Yokogawa CENTUM I/O system configurations. It provides an optical ESB bus connection for remote node communication. This configuration specifies dual-redundant power supplies, a 5 km optical repeater arrangement, a 100-120 V AC power supply, and an ESB bus connector unit with an integrated terminator.

Functional Description

The ANB11D provides the node-side interface for connecting remote I/O equipment to the ESB bus architecture. Its optical repeater arrangement supports communication over fiber-optic links, allowing the node to be located separately from the associated controller equipment.

The dual-redundant configuration provides two power supply paths. The optical repeater distance class and the master-side interface must be selected as a matched configuration rather than treating all ANB11D variants as interchangeable.

Model Configuration and Suffix Identification

The ordering code identifies the following configuration:

Code Specification
ANB11D Dual-Redundant ESB Bus Node Unit with Optical Repeater
-2 Dual-redundant power supply, 5 km optical repeater configuration
1 100-120 V AC power supply
5 Basic type without explosion protection
/BU2B ESB bus connector unit with terminator

The /BU2B option distinguishes this configuration from /BU2A, which specifies an ESB bus connector unit without a terminator. The integrated terminator is relevant to the node's position in the ESB bus connection arrangement.

Technical Specifications

Parameter Specification
Model ANB11D-215/BU2B
Brand Yokogawa
Product Type Dual-Redundant ESB Bus Node Unit
Bus Interface Optical ESB Bus
Power Supply Configuration Dual-redundant
Power Supply Voltage 100-120 V AC
Frequency 50/60 Hz
Power Consumption 200 VA, 120 W
Optical Repeater Range 5 km
I/O Module Capacity Maximum 8 modules
Mounting Type 19-inch rack mount
Mounting Screws M5 x 4
Dimensions (W x H x D) 482.6 x 221.5 x 205 mm
Weight 10 kg (including 8 I/O modules)
Explosion Protection Basic type, without explosion protection
ESB Bus Connector Connector unit with terminator

Optical Bus Connection Requirements

The ANB11D-215 configuration uses the 5 km optical repeater arrangement. Yokogawa identifies ANT502 as the corresponding 5 km optical ESB bus repeater slave module.

For the documented non-explosion-protection configuration, the master-side repeater must be selected from the ANT401-□0 or ANT401-□3 models when paired with the ANB11D-2□□ slave-side configuration. The master and slave repeater selections must follow the specified system arrangement.

Frequently Asked Questions

Q: Does ANB11D-215/BU2B support dual-redundant power supplies?

A: Yes. The -2 suffix specifies a dual-redundant power supply configuration. Two power supply modules are used in this arrangement.

Q: What is the difference between /BU2A and /BU2B?

A: /BU2A specifies an ESB bus connector unit without a terminator, while /BU2B specifies a connector unit with an integrated terminator.

Q: Can ANB11D-215/BU2B be used with a 220-240 V AC supply?

A: No. The suffix code 1 specifies a 100-120 V AC power supply. The 220-240 V AC configuration uses suffix code 2 and requires a different complete ordering configuration. 


Product Benefits

Caret Down

Reviews

Caret Down

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
View full details

Recommended products

Recently viewed product