Skip to product information
1 of 3

ANB10D-427/CU2T

Brand: Yokogawa
Order Number: ANB10D-427/CU2T
Type: ESB Bus Node Unit
Country:
Low stock: 15 left

Description

Caret Down

The Yokogawa ANB10D-427/CU2T is an ESB Bus Node Unit designed for dual-redundant ESB bus configurations in Yokogawa distributed control systems. It provides the interface between Field Control Units (FCUs) and Field Network I/O (FIO) modules, while distributing power to the installed I/O modules. This configuration includes dual-redundant 220-240 V AC power supplies, the ISA Standard G3 option, and an ESB connector unit with bus terminators.

Functional Description

The ANB10D serves as the node interface for communication between field I/O modules and the Field Control Unit through the ESB bus. It transfers analog and contact I/O signals between the field-side modules and the control system.

The node unit also distributes power to the installed FIO modules. Its dual-redundant ESB bus arrangement and redundant power supply configuration support continued system operation when one of the redundant paths or power sources is unavailable, subject to the system architecture and redundancy configuration.

Ordering Configuration

The complete ordering code identifies the following configuration:

Code Description
ANB10D Node Unit for Dual-Redundant ESB Bus
-4 Dual-redundant power supply
2 220-240 V AC power supply
7 ISA Standard G3 option, without explosion protection
/CU2T Connector Unit with Terminator for ESB Bus
S9564FA ESB bus connector with terminator, 2 pieces

The /CU2T option is relevant to the physical ESB bus connection and termination. It should be distinguished from /CU2N, which specifies a connector unit without the terminator option.

Technical Specifications

Parameter Specification
Model ANB10D-427/CU2T
Brand Yokogawa
Product Type ESB Bus Node Unit
ESB Bus Configuration Dual-redundant
Power Supply 220-240 V AC, 50/60 Hz
Power Supply Configuration Dual-redundant
Electric Power Consumption 230 VA, 120 W
Power Supply Modules 2
ESB Bus Interface Modules 2 SB401 modules in dual-redundant configuration
Maximum I/O Module Capacity 8
Environmental Option ISA Standard G3
Explosion Protection Without explosion protection
ESB Connector Unit With terminator, 2 x S9564FA
Mounting 19-inch rack
Mounting Screws 4 x M5
Dimensions 482.6 x 221.5 x 205 mm
Weight 10 kg

System Configuration and Installation

The ANB10D uses two power supply modules and two ESB Bus Interface Slave Modules (SB401) in its dual-redundant configuration. The power supply modules provide power to the installed I/O modules and field transmitters. The node accommodates up to 8 I/O modules, subject to the applicable system configuration and module allocation restrictions.

For connection to a Field Control Unit, an ESB Bus Coupler Module (EC401 or EC402) is required. For dual-redundant configurations, the coupler modules occupy FCU slots 7 and 8. In a single configuration, the coupler is installed in slot 7 and slot 8 remains empty.

The unit is designed for 19-inch rack mounting and uses four M5 mounting screws. Installation restrictions apply to the number and allocation of I/O modules, particularly when modules with built-in barriers are used. In that case, Yokogawa specifies an insulating partition (T9083NA) in the eighth slot.

Frequently Asked Questions

Q: How many I/O modules can the ANB10D-427/CU2T accommodate?

A: The maximum capacity is 8 I/O modules. Actual module selection and slot allocation must follow the applicable FIO system configuration requirements.

Q: Does this model include dual-redundant power and ESB communication modules?

A: Yes. The ANB10D dual-redundant configuration uses two power supply modules and two SB401 ESB Bus Interface Slave Modules.

Q: Does the /CU2T option include ESB bus terminators?

A: Yes. The /CU2T option specifies a connector unit with terminator and includes two S9564FA connector units. It is different from the /CU2N option, which specifies connector units without terminators.


Product Benefits

Caret Down

Reviews

Caret Down

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
View full details

Recommended products

Recently viewed product