Skip to product information
1 of 3

ANB10D-420/CU2T

Brand: Yokogawa
Order Number: ANB10D-420/CU2T
Type: ESB Bus Node Unit
Country:
Low stock: 15 left

Description

Caret Down

The Yokogawa ANB10D-420/CU2T is an ESB Bus Node Unit designed to interface field I/O signals with a Field Control Unit (FCU) through Yokogawa's ESB bus. It provides the connection point for I/O modules and distributes power to installed modules and field transmitters. The /CU2T option specifies an ESB bus connector unit with terminators.

Functional Description

The ANB10D is a rack-mounted node unit for a dual-redundant ESB bus configuration. It transfers analog and contact I/O signals between installed field I/O modules and the FCU, allowing the controller to exchange process data with field devices through the ESB communication interface.

The node unit also provides power distribution for the installed I/O modules and connected transmitters. Its dual-redundant power supply configuration supports two power supply modules, subject to the specified system configuration.

Connector Configuration

The /CU2T option identifies a Connector Unit with Terminator for the ESB bus. The specified accessory consists of two connector units, Yokogawa part number S9564FA. The terminator is part of the bus connection arrangement and should be considered when checking the node's physical ESB connection configuration.

Technical Specifications

Parameter Specification
Model ANB10D-420/CU2T
Brand Yokogawa
Product Type ESB Bus Node Unit
ESB Bus Configuration Dual-redundant
Power Supply Configuration Dual-redundant
Rated Supply Voltage 220-240 V AC
Supply Frequency 50/60 Hz
Power Consumption 230 VA, 120 W
Maximum I/O Module Capacity 8 modules
ESB Connector Option Connector Unit with Terminator
Connector Part Number S9564FA (2 pieces)
Mounting 19-inch rack
Mounting Screws M5 x 4
Power Terminal Screws M4
Weight 10 kg

Module Configuration and System Connection

The ANB10D supports the following module configuration:

  • PW481, PW482 or PW484: Power supply modules. Two modules are used for dual-redundant power supply configurations.
  • SB401: ESB Bus Interface Slave Module. Two modules are used for dual-redundant configurations.
  • I/O Modules: Up to 8 modules, subject to system configuration and installation restrictions.

For connection to a compatible Field Control Unit, an ESB Bus Coupler Module (EC401 or EC402) is required. The applicable FCU configuration determines the coupler installation positions and the supported number of ESB node units.

Frequently Asked Questions

Q: What is the difference between ANB10D and ANB10S?

A: ANB10D is designed for a dual-redundant ESB bus, while ANB10S is designed for a single ESB bus. Their connector options also differ: /CU2T is specified for ANB10D, whereas /CU1T is specified for ANB10S.

Q: How many I/O modules can the ANB10D accommodate?

A: The specified maximum is 8 I/O modules. Actual module allocation depends on the connected FCU, installed module types and system installation restrictions.

Q: What does the /CU2T option provide?

A: It specifies two ESB bus connector units with terminators, part number S9564FA. This option should be distinguished from /CU2N, which specifies connector units without the terminator designation.


Product Benefits

Caret Down

Reviews

Caret Down

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
View full details

Recommended products

Recently viewed product