Skip to product information
1 of 3

ANB10D-410/CU2T

Brand: Yokogawa
Order Number: ANB10D-410/CU2T
Type: ESB Bus Node Unit
Country:
Low stock: 15 left

Description

Caret Down

The Yokogawa ANB10D-410/CU2T is a Node Unit for a dual-redundant ESB (Extended Serial Backboard) bus in the CENTUM control system. It provides the node-side interface for connecting field input/output modules to the control system. The specified /CU2T option identifies a connector unit with an ESB bus terminator, which is supplied as part of the ordered configuration.

Technical Specifications

Parameter Specification
Model ANB10D-410/CU2T
Brand Yokogawa
Product Type Node Unit for Dual-Redundant ESB Bus
Power Supply Configuration Dual-redundant
ESB Bus Connector Connector Unit with Terminator
Connector Unit Part Number S9564FA (2 pieces)

ESB Bus Interface and I/O Configuration

The ANB10D node unit transfers analog and contact I/O signals between the field-side modules and a Field Control Unit (FCU) through the ESB bus. It also distributes power to the installed I/O modules and connected transmitters. This makes it the node-side interface for integrating field signals into the CENTUM control architecture.

For a dual-redundant configuration, the node unit accommodates two PW481, PW482, or PW484 power supply modules and two SB401 ESB Bus Interface Slave Modules. Up to eight I/O modules can be installed, subject to the applicable system configuration and module allocation restrictions.

Power Supply and Mounting

The documented power consumption for the 100-120 V AC configuration is 200 VA and 120 W. The node unit also has documented 220-240 V AC and 24 V DC supply configurations, with their respective electrical ratings depending on the selected suffix codes.

The unit is designed for 19-inch rack mounting, using four M5 mounting screws. Its approximate weight is 10 kg, including up to eight I/O modules.

ESB Bus Connector Configuration

The /CU2T option specifies a Connector Unit with Terminator for the ESB bus. Yokogawa identifies the associated part number as S9564FA, supplied in a quantity of two for the ANB10D configuration. The terminator is part of the specified connector arrangement rather than a separate I/O function.

Installation Requirements

When connecting the ANB10D to an FCU, an ESB Bus Coupler Module, EC401 or EC402, is required. For a dual configuration, the coupler modules occupy FCU slots 7 and 8. For a single configuration, the coupler is installed in slot 7 and slot 8 remains empty.

Frequently Asked Questions

Q: What is the function of the ANB10D-410/CU2T?

A: It serves as a dual-redundant ESB bus node, providing communication between field I/O modules and the FCU while distributing power to the installed modules.

Q: What does the /CU2T option mean?

A: It specifies a Connector Unit with Terminator for the ESB bus. The associated Yokogawa part number is S9564FA, with two pieces specified for ANB10D.

Q: How many I/O modules can the ANB10D accommodate?

A: The documented maximum is eight I/O modules. Actual module quantity and allocation depend on the system configuration and applicable installation restrictions.


Product Benefits

Caret Down

Reviews

Caret Down

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
View full details

Recommended products

Recently viewed product