Skip to product information
1 of 3

ANB10D-125/CU2N

Brand: Yokogawa
Order Number: ANB10D-125/CU2N
Type: ESB Bus Node Unit
Country:
Low stock: 15 left

Description

Caret Down

The Yokogawa ANB10D-125/CU2N is an ESB Bus Node Unit for the CENTUM VP distributed control system. It provides a node interface for connecting Field Control Unit (FCU) configurations to field network I/O through the ESB bus. The /CU2N option identifies the ESB bus connector unit, which is supplied as part of the specified configuration.

Function and System Interface

The ANB10D provides two main functions within the CENTUM VP field control architecture:

  • Transfers analog and contact I/O signals between the connected I/O modules and the Field Control Unit through the ESB bus.
  • Distributes power to the installed I/O modules.

The node unit connects to the FCU through an ESB Bus Coupler Module. The EC401 or EC402 must occupy slot 7 and, for a single coupler configuration, slot 8 must remain empty.

Module Configuration

The ANB10D platform supports the following module arrangement:

  • Power supply modules: PW481, PW482 or PW484. Two modules are required for a dual-redundant power supply configuration.
  • ESB bus interface slave modules: SB401. Two modules are required for a dual-redundant configuration.
  • I/O modules: Up to 8 modules, subject to the applicable system configuration restrictions.

These module positions and quantities should be checked against the installed FCU architecture before selecting replacement hardware.

Technical Specifications

Parameter Specification
Model ANB10D-125/CU2N
Brand Yokogawa
Product Type ESB Bus Node Unit
System CENTUM VP
Bus Interface ESB Bus
Node Configuration Dual-redundant ESB Bus
Connector Unit /CU2N
Connector Part Number S9562FA (2 pieces)
Maximum I/O Module Capacity 8 modules
Mounting 19-inch rack
Dimensions (W x H x D) 482.6 x 221.5 x 205 mm
Weight 10 kg

Installation and Configuration Considerations

The ANB10D is designed for 19-inch rack installation and uses four M5 mounting screws. Its connector configuration is different from the /CU2T option, which specifies ESB bus connector units with terminators. The /CU2N configuration specifies two standard ESB bus connector units.

When installing FIO modules with built-in barriers, an insulating partition (part number T9083NA) must be fitted in the eighth slot. Module allocation and ambient temperature restrictions should also be checked against the applicable system installation documentation.

Frequently Asked Questions

Q: What is the difference between ANB10D and ANB10S?

A: ANB10D is the node unit for a dual-redundant ESB bus, whereas ANB10S is designed for a single ESB bus. Their connector unit option codes also differ: /CU2N for ANB10D and /CU1N for ANB10S.

Q: How many I/O modules can the ANB10D accommodate?

A: The specified node unit supports up to 8 I/O modules. Actual module selection and allocation depend on the FCU configuration and applicable installation restrictions.

Q: Does /CU2N include an ESB bus terminator?

A: No. /CU2N specifies two ESB bus connector units, part number S9562FA. The corresponding terminator-equipped option is /CU2T, using part number S9564FA.


Product Benefits

Caret Down

Reviews

Caret Down

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
View full details

Recommended products

Recently viewed product