Skip to product information
1 of 3

AFG10D

Brand: Yokogawa
Order Number: AFG10D
Type: Duplexed Field Control Unit
Country:
Low stock: 15 left

Description

Caret Down

The Yokogawa AFG10D is a Duplexed Field Control Unit (FCU) designed for Yokogawa distributed control systems using the V net and Remote I/O (RIO) architecture. It performs control processing within the Field Control Station (FCS) and supports redundant communication interfaces. The unit provides 32 Mbyte of main memory and is designed for 19-inch rack mounting.

Functional Description

The AFG10D serves as the processing unit of a Field Control Station. It executes control computations and manages communication between the control station and connected RIO nodes. Its duplexed configuration provides a redundant field control arrangement, distinguishing it from the single-unit AFG10S configuration.

The unit uses a VR5432 processor operating at 133 MHz. Its 32 Mbyte main memory stores the data required for control processing. Battery-backed memory protection maintains the main memory contents for up to 72 hours during a power failure, subject to the specified battery conditions.

Communication Interfaces

The AFG10D provides interfaces for both V net and RIO communication.

  • V net: Dual-redundant communication interface.
  • RIO bus: Dual-redundant or single interface configuration, depending on the specified hardware arrangement.
  • Node capacity: Supports connection of up to 8 nodes.

The V net interface supports communication within the control system, while the RIO bus connects the FCU to remote I/O nodes. These interfaces form the communication paths between control processing and distributed field equipment.

Power Supply and Memory Protection

The AFG10D supports AC or DC power supply configurations. The required power supply type is determined by the applicable suffix code. Its power consumption differs according to the selected input voltage.

The FCU also provides a status contact output for failure indication. The two-terminal normally closed contact arrangement opens when the FCU fails, allowing external monitoring equipment to detect the unit's failure status.

Technical Specifications

Parameter Specification
Model AFG10D
Brand Yokogawa
Product Type Duplexed Field Control Unit
System Architecture V net / RIO
Processor VR5432
Processor Frequency 133 MHz
Main Memory 32 Mbyte
Memory Protection Battery backup
Main Memory Backup Time Maximum 72 hours
Battery Recharge Time Minimum 48 hours
V net Interface Dual-redundant
RIO Bus Interface Dual-redundant or single
Maximum Connectable Nodes 8
FCU Status Contact Output 2 terminals (NC, C)
Status Contact Rating 30 V DC, maximum 0.3 A
Power Supply Options 100-120 V AC, 220-240 V AC, 24 V DC
AC Frequency 50/60 Hz
Power Consumption (100-120 V AC) 400 VA
Power Consumption (220-240 V AC) 410 VA
Power Consumption (24 V DC) 8 A
Mounting 19-inch rack mounting
Mounting Hardware 8 x M5 screws; insulation bush accessory

Mounting and Connection Requirements

The AFG10D is designed for installation in a 19-inch rack. The specified mounting arrangement uses eight M5 screws, with insulation bushes listed as accessories.

Power supply, grounding and FCU status contact connections use M4 screw terminals. The selected power supply configuration must match the ordered unit. Before installation or replacement, verify the existing FCU power arrangement and RIO communication configuration.

Frequently Asked Questions

Q: What is the difference between Yokogawa AFG10D and AFG10S?

A: Both models are Field Control Units for V net and RIO systems. AFG10D is the duplexed version, while AFG10S is the non-duplexed version. Their power consumption and hardware configuration also differ.

Q: How much memory does the AFG10D provide, and how long is it retained during a power failure?

A: The AFG10D provides 32 Mbyte of main memory. Battery backup maintains the memory contents for a maximum of 72 hours, and the specified minimum battery recharge time is 48 hours.

Q: Which power supply configurations are available for the AFG10D?

A: The documented power supply options are 100-120 V AC, 220-240 V AC and 24 V DC. The actual power supply configuration must be identified from the complete ordering code and unit nameplate.


Product Benefits

Caret Down

Reviews

Caret Down

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
View full details

Recommended products

Recently viewed product