ADV551-P10/D5A00

The Yokogawa ADV551-P10/D5A00 is a 32-channel digital output module designed for 24 V DC control signals. It provides isolated digital outputs and supports pulse-width and time-proportional output functions through the ADV551 platform. The /D5A00 option specifies a KS cable interface adapter, model ATD5A-00, for connecting the module to the external digital signal wiring.

Technical Specifications

Parameter	Specification
Model	ADV551-P10/D5A00
Brand	Yokogawa
Product Type	Digital Output Module
Number of Channels	32
Rated Voltage	24 V DC
Output Isolation	Isolated
Output Function	Pulse-width output and time-proportional output
Cable Interface Adapter	ATD5A-00
Adapter Configuration	KS cable interface adapter for 32-channel digital signals

Output Functions

The ADV551 supports conventional digital status outputs as well as pulse-based control functions. Its pulse-width output function generates output pulses with configurable durations, while time-proportional output controls the ON/OFF ratio over a defined time interval.

These functions allow the module to handle both discrete switching commands and time-based control signals. The selected output mode must correspond to the control strategy configured in the host system.

Cable Interface Configuration

The /D5A00 option identifies the KS cable interface adapter ATD5A-00. This adapter provides the external connection interface for the module's 32 digital output channels.

When checking a replacement or spare assembly, verify the adapter option as well as the module model. A module supplied with a different terminal or cable interface configuration may require a different external wiring arrangement.

Output Signal and Application

Each channel operates as a discrete output point, transmitting an ON/OFF control command to an external load. The isolated channel arrangement separates the field output circuitry from the system-side circuitry, helping limit the propagation of electrical disturbances between these sections.

The ADV551 output architecture also supports current-sink operation. External load wiring and power supply arrangements must therefore follow the module's electrical specifications and the selected interface configuration.

Connection and System Configuration

The ATD5A-00 adapter is used with the dedicated cable connection arrangement for the ADV551. Yokogawa documentation identifies the AKB331 as the dedicated cable associated with this adapter configuration. The external terminal or relay-board arrangement should be checked against the installed system wiring before replacement.

Frequently Asked Questions

Q: What is the difference between ADV551 and ADV561?

A: The ADV551 provides 32 isolated digital output channels at 24 V DC, while the ADV561 provides 64 channels. They are different channel-capacity configurations and should not be treated as direct substitutes without checking the system configuration.

Q: What does the /D5A00 option specify?

A: It specifies the ATD5A-00 KS cable interface adapter for 32-channel digital signals. The associated cable and external connection arrangement should be verified when ordering a replacement.

Q: Does the ADV551-P10 support pulse-width output?

A: The -P suffix identifies the pulse-width and time-proportional output function in Yokogawa's ADV551 product documentation. Confirm the complete suffix configuration against the module nameplate before replacement.

---