ADM51C

Product Overview

ADM51C is a high-reliability Contact Output Module (Digital Output) designed for Yokogawa Distributed Control Systems, used within the CENTUM CS 1000, CENTUM CS 3000, and CENTUM VP platforms.

Technical Specifications

Hardware & Capacity

• Module Type: Transistor contact output module

• Number of Channels: 16 independent output points

• Signal Isolation: Per-point electrical insulation

Output Electrical Ratings

• Output Contact Type: Transistor contact

• Maximum Load Voltage: 30 V DC

• Maximum Load Current: ≤ 100 mA (resistive/inductive load)

Functional Performance

• Output Modes: Status output, pulse output, one-shot pulse, time-proportional ON/OFF control

• Pulse Width Range: 0.1 to 7200 seconds

• Pulse Resolution: 20 ms

Power & Electrical Protection

• Current Consumption: ≤ 600 mA at 5.0 V DC

• Insulation Resistance: ≥ 100 MΩ at 500 V DC

• Withstand Voltage: 500 V AC

Physical & Environmental

• Dimensions: 2.5 cm × 22.9 cm × 7.6 cm

• Weight: Approx. 0.11 kg

• Operating Temperature: 0°C to 50°C

• Operating Humidity: 5% to 90% RH (non-condensing)

• Mounting & Wiring: I/O module nest installation with M4 screw terminals and KS-series nested cables

---