XBTG2110

The Schneider Electric XBTG2110, also cataloged as the XBTG2110 touchscreen panel, provides operator interface functions through a 5.7-inch QVGA display with 320 x 240 pixel resolution. It uses 24 VDC power and provides RS232C/RS422/RS485 and RS485 serial communications, plus a USB Type A master port.

Hardware Specifications

Parameter	Specification
Model	XBTG2110
Brand	Schneider Electric
Product Line	MAGELiS
Product Type	Touchscreen Panel
Display Size	5.7 inches
Display Resolution	320 x 240 pixels (QVGA)
Display Colors	Blue and white with 16 levels of gray
Memory	128 kB SRAM with lithium battery backup; 16 MB flash EPROM
COM1	Male SUB-D 9; RS232C/RS422/RS485
COM2	RJ45; RS485
USB Port	Type A master, V1.1
Power Supply	24 VDC
Voltage Limits	19.2 V to 28.8 V
Inrush Current	30 A
Power Consumption	18 W
Mounting	Flush mounting
Front Protection	IP65
Rear Protection	IP20
Operating Temp	0 deg C to 50 deg C
Storage Temp	-20 deg C to 60 deg C
Relative Humidity	0% to 85%, without condensation
Weight	1.06 lbs
Replacement	HMIGTO2300

MAGELiS Display and Interface Characteristics

The XBTG2110 uses a 5.7-inch display with 320 x 240 pixel QVGA resolution. Graphic output is specified as blue and white with 16 levels of gray. The operator interface stores application data in 16 MB flash EPROM and uses 128 kB SRAM with lithium battery backup.

Serial communication is provided through COM1 and COM2. COM1 supports RS232C, RS422, and RS485 through a male SUB-D 9 connector. COM2 provides RS485 through an RJ45 connector. A USB Type A master port compliant with USB V1.1 is also provided.

The unit operates from a nominal 24 VDC supply with an allowable input range of 19.2 V to 28.8 V. The specified power consumption is 18 W, with a 30 A inrush current.

Frequently Asked Questions (FAQ)

Q: What serial interfaces are available on the XBTG2110?
A: COM1 supports RS232C, RS422, and RS485 through a male SUB-D 9 connector. COM2 provides RS485 through an RJ45 connector.

Q: What power supply does the XBTG2110 require?
A: The panel uses a 24 VDC power supply and accepts 19.2 V to 28.8 V according to the supplied specifications.

Q: What are the enclosure protection ratings?
A: The front panel is rated IP65, while the rear panel is rated IP20.

Field Installation Guidelines

• Install the unit using the specified flush-mounting arrangement and provide sufficient clearance for rear connectors and wiring.
• Verify that the field DC supply remains within the specified 19.2 V to 28.8 V input range.
• Route serial communication cables separately from high-voltage and high-current conductors to reduce electrical interference.
• Use appropriate shield termination practices for shielded communication cables and avoid creating unintended ground-current paths.
• Maintain the specified operating temperature and humidity conditions during operation.
• Protect the rear IP20 section from direct exposure to dust, moisture, and conductive contaminants.
• Confirm connector orientation and terminal assignments before applying power or connecting external communication equipment.
• The supplied data identifies HMIGTO2300 as the replacement for XBTG2110.

---