XBTF034510

Configured for operator visualization and touchscreen interaction in MAGELiS control systems, the Schneider Electric XBTF034510 (XBTF034510 Human-Machine Interface) provides a 10.4-inch color LCD with 640 x 480 pixel resolution. The unit operates from 24 VDC and has 32 MB of dynamic RAM. Front-panel protection is IP65, while the rear panel is rated IP20.

Hardware Specifications

Parameter	Specification
Model	XBTF034510
Brand	Schneider Electric
Product Line	MAGELiS
Product Type	Human-Machine Interface
Display Type	Color LCD
Screen Type	Touchscreen
Display Size	10.4 inches
Resolution	640 x 480 pixels
Supply Voltage	24 VDC
Dynamic RAM Memory	32 MB
Front Panel IP Rating	IP65
Rear Panel IP Rating	IP20
Operating Temp	0 deg C to 45 deg C
Relative Humidity	0 to 85%, non-condensing
Power Consumption	35 W
Weight	3.31 lbs

MAGELiS Operator Interface Characteristics

The XBTF034510 uses a 10.4-inch touchscreen as the operator input interface and a color LCD for graphical display. The 640 x 480 pixel resolution defines the available display raster. Electrical supply is 24 VDC with a stated power consumption of 35 W.

The enclosure protection differs between the operator-facing and cabinet-facing surfaces. The front panel is rated IP65, while the rear panel is rated IP20. Installation therefore requires appropriate cabinet or panel protection for the rear portion of the HMI.

The supplied lifecycle information identifies XBTGT5330 + XBTZGCO3 as the replacement combination for XBTF034510.

Frequently Asked Questions (FAQ)

Q: What supply voltage does the XBTF034510 require?
A: The specified supply voltage is 24 VDC.

Q: What are the front and rear enclosure protection ratings?
A: The front panel is rated IP65 and the rear panel is rated IP20.

Q: What display hardware is provided?
A: The unit has a 10.4-inch color LCD touchscreen with a 640 x 480 pixel resolution.

Field Installation Guidelines

• Mount the HMI in a panel opening compatible with the specified enclosure and mechanical installation requirements.
• Maintain the IP65 sealing condition at the front panel during installation. The mounting surface and gasket interface should be clean and free from damage.
• Protect the rear IP20 section from direct exposure to water, dust, and other environmental contaminants.
• Supply the unit from a suitable 24 VDC control power circuit.
• Route power and communication wiring separately from high-current or high-noise conductors where practical.
• Terminate cable shields according to the grounding scheme specified for the associated control system.
• Provide adequate clearance around the rear of the unit for wiring, inspection, and service access.
• Verify polarity, supply voltage, terminal connections, and panel mounting before energizing the HMI.

---