TCSESM083F23F0

The Schneider Electric TCSESM083F23F0, also cataloged as the TCSESM083F23F0 Ethernet TCP/IP managed switch, operates as a dedicated hardware component for industrial Ethernet data communication within ConneXium network platforms. The switch provides 10/100BASE-TX copper Ethernet connectivity, managed switching functions, and transparent network communication control.

Hardware Specifications

Parameter	Specification
Model	TCSESM083F23F0
Brand	Schneider Electric
Weight	0.20 kg
Dimensions	Width: 74 mm; Height: 131 mm
Operating Temp	0 to 40 deg C
Power Consumption	5.3 W
Product Type	Ethernet TCP/IP Managed Switch
Product Line	ConneXium
Network Protocol	Ethernet TCP/IP
Ethernet Ports	8 x 10/100BASE-TX copper ports
Rated Supply Voltage	12...48 VDC
Mounting Type	35 mm symmetrical DIN rail
Cable Distance	Maximum 100 m between devices using copper cable
Alarm Output	1 volt-free contact, 1 A
Cascade Support	Unlimited switches in cascade configuration
Ring Support	Maximum 50 switches in a ring
Cybersecurity Function	Port hardening
Concept	Transparent Ready

Profinet / EtherNet Industrial Network Characteristics

The TCSESM083F23F0 supports deterministic industrial Ethernet communication through its managed switching functions. The ConneXium architecture provides port-level configuration, network segmentation capability, and Ethernet traffic management for control system communication paths. The switch supports firmware-managed network parameters and copper Ethernet transmission through 10/100BASE-TX interfaces.

The managed switch design includes port hardening functions for restricting unauthorized network access and maintaining controlled communication paths. DIN rail mounting allows direct integration into industrial control cabinets with standard wiring layouts.

Frequently Asked Questions

Q: What type of Ethernet connection is supported by the TCSESM083F23F0?
A: The switch provides 8 copper Ethernet ports supporting 10/100BASE-TX communication.

Q: Can the TCSESM083F23F0 be installed in a ring topology?
A: Yes. The switch supports ring configurations with a maximum of 50 switches in the network ring.

Q: What power supply range is required for this managed switch?
A: The device operates with a rated supply voltage range of 12...48 VDC.

Field Installation Guidelines

Install the TCSESM083F23F0 on a 35 mm symmetrical DIN rail inside an enclosure suitable for the operating environment. Use shielded Ethernet cabling where required by the installation design and maintain separation between communication wiring and high-voltage power conductors.

Connect the protective grounding point according to the cabinet grounding scheme before network commissioning. Verify Ethernet cable routing, connector locking, and port configuration before applying power. Configure network parameters through the approved management interface and confirm communication status with connected Ethernet devices.

---