TCSESM043F23F0

Configured for Ethernet TCP/IP network management and industrial data communication in Modicon Networking systems, the Schneider Electric TCSESM043F23F0 (TCSESM043F23F0 Managed Switch) provides direct physical Ethernet switching execution through four copper communication ports.

Hardware Specifications

Parameter	Specification
Model	TCSESM043F23F0
Brand	Schneider Electric
Product Type	Ethernet TCP/IP Managed Switch
Range	Modicon Networking / ConneXium
Weight	0.4 kg
Dimensions	47 mm (W) x 111 mm (D) x 131 mm (H)
Operating Temp	0 deg C to 60 deg C
Power Consumption	5.3 W
Supply Voltage	12...48 V DC
Supply Voltage Limits	9.6...60 V DC SELV / 18...30 V AC SELV
Ethernet Ports	4 x 10BASE-T/100BASE-TX copper ports
Transmission Medium	Shielded twisted pair CAT 5E copper cable
Maximum Copper Cable Distance	100 m between devices
Communication Protocols	Ethernet TCP/IP, SSH, HTTP, HTTPS, SNMP, LLDP, Telnet, SNTP, MRP
Redundancy Functions	HiPER Ring, RSTP, redundant network coupling
Maximum Switches in Ring	50
Mounting	35 mm symmetrical DIN rail
Protection Degree	IP20

Schneider Electric Ethernet Network Communication

The TCSESM043F23F0 integrates Ethernet switching functions for Modicon industrial networks with four copper RJ45 ports supporting 10BASE-T and 100BASE-TX transmission. The switch supports managed network services including VLAN configuration, multicast filtering, IGMP snooping, SNTP client functions, SMTP V3, Quality of Service (QoS), port monitoring, port mirroring, and FDR services.

The device supports deterministic industrial Ethernet architectures through redundancy functions including HiPER Ring and RSTP. Firmware functions include configuration through web server access, system diagnostics, alarm reporting, and network status monitoring.

The ConneXium switch architecture supports firmware flash compatibility with managed Ethernet functions, allowing configuration retention and operational monitoring through the Modicon Networking platform. Port hardening cybersecurity functions are included for controlled Ethernet access management.

Frequently Asked Questions

Q: What type of Ethernet connection does TCSESM043F23F0 support?
A: The switch provides four 10BASE-T/100BASE-TX copper Ethernet ports using shielded RJ45 connections with CAT 5E twisted shielded pair cable.

Q: What mounting method is specified for this managed switch?
A: The TCSESM043F23F0 is designed for 35 mm symmetrical DIN rail mounting inside industrial control cabinets.

Q: What redundancy protocols are supported by the switch?
A: The device supports HiPER Ring, Rapid Spanning Tree Protocol (RSTP), and redundant network coupling functions for industrial Ethernet network structures.

Field Installation Guidelines

Install the TCSESM043F23F0 on a properly grounded DIN rail inside an enclosure meeting the required environmental conditions. Use shielded CAT 5E Ethernet cables and maintain correct shield termination practices to reduce electromagnetic interference.

Separate Ethernet communication wiring from high-voltage power cables and high-current switching conductors. Verify the removable power connector wiring before energizing the device. Confirm link status LEDs, power indicators, and fault diagnostics after installation.

For redundant Ethernet configurations, verify ring topology wiring and switch configuration parameters before placing the network into operation.

---