TCSEAAF1LFS00

Configured for Gigabit Ethernet fiber optic data transmission in Modicon Networking TCSESM switch platforms, the Schneider Electric TCSEAAF1LFS00 (TCSEAAF1LFS00 SFP Module) provides direct physical/electrical execution for Ethernet connectivity through a 1000BASE-LX LC fiber interface. The module supports single-mode and multi-mode optical transmission media for Gigabit port integration.

Hardware Specifications

Parameter	Specification
Model	TCSEAAF1LFS00
Brand	Schneider Electric
Product Type	SFP Module
Range	Modicon Networking / ConneXium
Origin	MX
Weight	0.04 kg
Dimensions	50 mm depth x 20 mm width x 18 mm height
Operating Temp	0 to 60 deg C
Ethernet Port	1000BASE-LX
Connector Type	LC fiber connector
Transmission Mode	Single mode 9/125 um; Multi mode 50/125 um; Multi mode 62.5/125 um
Compatible Switches	MCSESM switch; TCSESM switch

Profinet / EtherNet Network Optical Connectivity

The TCSEAAF1LFS00 provides optical Ethernet conversion through an SFP interface installed on compatible ConneXium TCSESM switches. The fiber adaptor uses LC termination and supports 1000BASE-LX communication paths for industrial Ethernet network expansion.

The optical interface supports different fiber constructions including single-mode 9/125 um and multi-mode 50/125 um or 62.5/125 um cables. Proper fiber type matching between the transceiver and cable installation is required to maintain optical signal integrity.

Frequently Asked Questions

Q: Which switch platforms are compatible with the TCSEAAF1LFS00 module?
A: The module is specified for MCSESM and TCSESM switch platforms with Gigabit Ethernet SFP ports.

Q: What fiber types can be connected to this SFP module?
A: The module supports single-mode 9/125 um fiber and multi-mode 50/125 um or 62.5/125 um fiber transmission.

Q: What is the Ethernet interface type provided by this module?
A: The module provides a 1000BASE-LX Ethernet optical interface through an LC connector.

Field Installation Guidelines

Install the TCSEAAF1LFS00 only in compatible SFP slots of supported Modicon Networking switches. Verify the switch configuration and optical port assignment before insertion.

Use fiber cables matching the supported transmission mode and core dimensions. Maintain correct fiber routing practices, avoid excessive bending radius, and protect LC connectors from contamination during installation.

For industrial Ethernet installations, separate fiber communication paths from high-voltage power wiring and sources of electromagnetic interference. Confirm link status through the connected switch diagnostics after installation.

---