HMIGTO5315

Configured for touchscreen visualization, operator input, and serial/Ethernet data exchange in Harmony GTO systems, the Schneider Electric HMIGTO5315 (HMIGTO touchscreen panel) provides direct display and control functions through a 10.4 inch TFT LCD, resistive touch panel, RS232C, RS485, and Ethernet interfaces.

Hardware Specifications

Parameter	Specification
Model	HMIGTO5315
Brand	Schneider Electric
Product Type	Touchscreen Operator Panel
Series	Harmony GTO
Display	10.4 inch color TFT LCD
Display Resolution	640 x 480 pixels VGA
Display Colors	65536
Touch Technology	Resistive film, 1024 x 1024 touch zone
Touch Panel Life	1000000 cycles
Memory	96 MB Flash EPROM; 512 KB internal SRAM
Storage	SD/SDHC card, up to 32 GB
Processor	ARM926EJ-S
Supply Voltage	24 VDC
Supply Voltage Limits	19.2 to 28.8 VDC
Maximum Power Consumption	17 W
Power Consumption, Backlight Off	7 W
Power Consumption, Backlight Dimmed	8 W
Inrush Current	30 A
Serial Interface	RS232C, 2400 to 115200 bps; RS485, 2400 to 115200 bps
Siemens MPI Interface	RS485, 187.5 kbps
Ethernet	10BASE-T/100BASE-TX, IEEE 802.3
USB Interfaces	USB 2.0 Type A and USB 2.0 Mini-B
Protocol Support	Modbus, Uni-TE, Modbus Plus, FIPWAY, Modbus TCP and listed third-party protocols
Front Material	Stainless steel 304
Enclosure Material	PPT
Mounting	Flush mounting
Cooling	Natural convection
Dimensions	316.5 x 258.5 x 57 mm
Weight	2.5 kg
Operating Temp	0 to 55 deg C
Storage Temp	-20 to 60 deg C
Relative Humidity	10 to 90 percent, non-condensing
Operating Altitude	Below 2000 m
Front Protection	IP66K; NEMA 4X for indoor use
Rear Protection	IP20
Standards	IEC 61131-2, IEC 61000-6-2, UL 508
Certifications	C-tick, cULus, CE, KCC, UKCA, UKEX
Origin	ID

Ethernet and Serial Communication

The HMIGTO5315 provides one Ethernet RJ45 interface supporting 10BASE-T/100BASE-TX and IEEE 802.3 communication. Modbus TCP is available through the Ethernet interface. The serial architecture includes one RS232C port and one RS485 port, with configurable communication rates within the specified ranges. The RS485 interface also supports Siemens MPI operation at 187.5 kbps.

The panel supports Modbus and other listed Schneider Electric protocols, together with specified third-party protocols for Mitsubishi, Omron, Rockwell Automation Allen-Bradley, and Siemens systems. Communication selection must match the protocol configuration of the connected controller.

Frequently Asked Questions

Q: What supply voltage is required by the HMIGTO5315?
A: The rated supply is 24 VDC, with an allowable supply range of 19.2 to 28.8 VDC.

Q: What communication interfaces are integrated?
A: The panel provides RS232C, RS485, Ethernet RJ45, USB 2.0 Type A, and USB 2.0 Mini-B interfaces.

Q: Can the HMIGTO5315 operate in a stainless steel front-panel installation?
A: Yes. The front material is stainless steel 304, and the specified front protection is IP66K. The mounting method is flush mounting using 8 nuts or 4 L brackets.

Field Installation Guidelines

Install the HMIGTO5315 by flush mounting the panel in a mechanically stable enclosure or control surface. Maintain the specified mounting arrangement and ensure that the front sealing surface is clean and undamaged before installation.

Supply the unit from a regulated 24 VDC source within the specified 19.2 to 28.8 VDC range. Route DC power wiring separately from high-current switching conductors where practical. Connect protective grounding according to the enclosure and site electrical design.

For RS232C and RS485 wiring, use cabling appropriate to the selected communication interface. Keep communication wiring separated from high-voltage and high-current conductors to reduce electromagnetic coupling. For RS485 networks, observe the network topology and termination requirements defined by the selected protocol.

Use shielded Ethernet or serial cabling where required by the installation environment. Apply cable shielding and grounding according to the controller, communication equipment, and site EMC requirements.

The front panel provides IP66K protection when installed according to the manufacturer's mounting and sealing requirements. The rear side remains IP20 and should therefore be protected from direct exposure to liquids, conductive contamination, and unsuitable mechanical contact.

---