HMIGTO5310

Configured for touchscreen operator display and control in the Harmony GTO platform, the Schneider Electric HMIGTO5310 (HMIGTO5310 advanced touchscreen panel) provides a 10.4 inch color TFT interface with VGA resolution, serial communication, Ethernet communication, and USB connectivity. The unit operates from 24 VDC and provides 96 MB Flash EPROM, resistive touch input, and SD card storage.

Hardware Specifications

Parameter	Specification
Model	HMIGTO5310
Brand	Schneider Electric
Product Type	Advanced touchscreen panel
Series	Harmony GTO
Origin	Indonesia
Display	10.4 inch color TFT LCD
Resolution	640 x 480 pixels VGA
Display Colors	65536
Touch Technology	Resistive film
Touch Resolution	1024 x 1024
Touch Life	1000000 cycles
Memory	96 MB Flash EPROM
Internal RAM	512 KB SRAM
Rated Supply	24 VDC
Supply Voltage Range	19.2-28.8 VDC
Maximum Power Consumption	17 W
Inrush Current	30 A
COM1	RS232C, 2400-115200 bps, SUB-D 9
COM2	RS485, 2400-115200 bps, RJ45
COM2 MPI	Siemens MPI, 187.5 kbps
Ethernet	10BASE-T/100BASE-TX, RJ45
USB	USB 2.0 Type A and Mini-B
SD Storage	SD/SDHC, up to 32 GB
Mounting	Flush mounting, 4 screw clamps
Cooling	Natural convection
Dimensions	272.5 x 214.5 x 57 mm
Weight	2 kg
Operating Temp	0 to 55 deg C
Storage Temp	-20 to 60 deg C
Relative Humidity	10-90 %, non-condensing
Operating Altitude	< 2000 m
Front Protection	IP65
Rear Protection	IP20
Front NEMA Rating	NEMA 4X, indoor use
Standards	UL 508, IEC 61131-2, IEC 61000-6-2
Certifications	cULus, CE, C-tick, KCC, UKCA, UKEX

Industrial Control Communication and I/O Connectivity

The HMIGTO5310 provides multiple physical communication interfaces for connection to automation controllers and networks. COM1 supports RS232C communication at 2400 to 115200 bps. COM2 provides RS485 communication through an RJ45 interface at 2400 to 115200 bps and also supports Siemens MPI at 187.5 kbps.

The Ethernet interface supports 10BASE-T/100BASE-TX and IEEE 802.3. Supported downloadable protocols include Modicon Modbus, Modicon Uni-TE, Modicon Modbus Plus, Modicon FIPWAY, Modicon Modbus TCP, and selected third-party protocols for Mitsubishi, Omron, Rockwell Automation, and Siemens systems.

The panel uses natural convection cooling and flush mounting. Cable routing should maintain separation between communication wiring and high-current or high-noise power conductors. Shielded communication cables should be terminated according to the grounding requirements of the connected network.

Frequently Asked Questions

Q: What supply voltage does the HMIGTO5310 require?
A: The rated supply is 24 VDC, with an operating supply range of 19.2 to 28.8 VDC.

Q: Which physical communication interfaces are integrated?
A: The panel provides one RS232C interface, one RS485 interface, one Ethernet RJ45 interface, and USB 2.0 Type A and Mini-B ports.

Q: Can the HMIGTO5310 store application or data files externally?
A: Yes. The panel provides one SD card slot supporting SD and SDHC cards up to 32 GB.

Field Installation Guidelines

Install the HMIGTO5310 by flush mounting and securing the panel with the specified four screw clamps. Maintain the required panel cutout and mechanical clearance around the enclosure.

Connect the 24 VDC supply with correct polarity and provide an appropriate protective circuit upstream of the panel. Keep the DC supply wiring separated from high-current motor and drive conductors.

Route RS232, RS485, and Ethernet cables away from switching power conductors where practical. For shielded communication cables, terminate the shield according to the grounding method specified for the associated communication system.

The front panel provides IP65 protection when correctly installed. The rear section is rated IP20 and should remain within an enclosure providing suitable protection against dust, moisture, and accidental contact.

Operate the panel within 0 to 55 deg C and 10-90 % relative humidity without condensation. Provide sufficient enclosure ventilation to maintain the specified ambient temperature because the unit relies on natural convection.

---