BMEXBP060206

The Schneider Electric BMEXBP060206, also cataloged as the BMEXBP060206 Ethernet Backplane, operates as a dedicated hardware component for Ethernet and X-bus communication distribution within Modicon M580 and Modicon X80 controller platforms. It provides a 6-slot rack structure for CPU, I/O, power supply, and communication modules with integrated backplane data exchange.

Hardware Specifications

Parameter	Specification
Model	BMEXBP060206
Brand	Schneider Electric
Origin	US
Weight	1.02 kg
Operating Temp	0 deg C to +60 deg C
Power Consumption	191 mW at 3.3 VDC; 3.6 W at 24 VDC
Product Type	Ethernet Backplane Rack
Product Series	Modicon M580 / Modicon X80
Slot Count	6 multi-bus slots
Bus Type	Ethernet backplane + X-bus
Ethernet Interface	Dual Ethernet backplane integration
Compatible Modules	Modicon M580 CPUs, Modicon X80 I/O modules, power supply modules, communication modules
Current Consumption	152 mA at 24 VDC; 58 mA at 3.3 VDC
Mounting Method	Panel mounting with screws or 35 mm symmetrical DIN rail mounting
Protection Rating	IP20
Humidity Range	5-95% relative humidity without condensation
MTBF	1353797 H

Ethernet Backplane Communication Architecture

The BMEXBP060206 integrates Ethernet and X-bus communication paths into a single Modicon X80 rack assembly. The backplane provides electrical connections between inserted modules, allowing compatible processors, I/O modules, and communication modules to exchange data through the rack bus structure.

The rack supports direct Ethernet communication through compatible Modicon M580 modules without additional external Ethernet cabling between rack components. The XBE connector provides the expansion interface for rack communication extension.

Frequently Asked Questions

Q: What modules can be installed on the BMEXBP060206 backplane?
A: The rack accepts compatible Modicon M580 processors, Modicon X80 I/O modules, power supply modules, and application-specific communication modules.

Q: How is power distributed through the BMEXBP060206?
A: The rack receives power from an inserted X80 power supply module and distributes electrical supply through the backplane connection to installed modules.

Q: Does the BMEXBP060206 support both Ethernet and X-bus communication?
A: Yes. The backplane integrates Ethernet backplane communication and standard X-bus functionality within the same rack structure.

Field Installation Guidelines

Install the BMEXBP060206 on a mechanically stable panel or 35 mm symmetrical DIN rail according to the Modicon X80 mounting requirements. Verify that the rack is correctly fixed before inserting processor, power supply, or I/O modules.

Maintain proper separation between power wiring and communication wiring to reduce electrical interference. Connect shielded communication cables according to the applicable Schneider Electric grounding recommendations. Ensure that unused slots remain protected from contamination and that module insertion connectors remain free of mechanical stress.

Before system startup, confirm that the installed modules match the configured Modicon M580 architecture and that all backplane connections are fully seated.

---