BMEP585040C

Configured for PAC processing and Ethernet based control execution in Modicon M580 systems, the Schneider Electric BMEP585040C (BMEP585040C Processor Module) provides direct physical/electrical execution. It manages local and remote I/O processing, application logic execution, and Ethernet communication services through the M580 rack architecture.

Hardware Specifications

Parameter	Specification
Model	BMEP585040C
Brand	Schneider Electric
Origin	US
Product Type	Processor Module
Series	Modicon M580
Processor Capacity	5120 discrete local I/O channels, 1280 analog local I/O channels
Application Channels	180 local rack application specific channels
Rack Configuration	Maximum 8 racks
Remote I/O Capacity	31 remote I/O stations with 2 remote drops per station
Distributed Equipment	64 devices
Communication Interfaces	1 Ethernet TCP/IP service port, 2 Ethernet TCP/IP device network ports, Ethernet HSBY port, USB mini B
Memory	24 MB program RAM, 4096 kB data RAM, 10 kB system memory, expandable 4 GB flash storage
Power Consumption	300 mA at 24 VDC
Weight	0.849 kg
Operating Temp	-25 to 60 deg C
Protection Rating	IP20
Mounting Method	Internal power supply via rack
Firmware Compatibility	Latest firmware version 4.40
Certification	CE, UL, CSA, ATEX Zone 2/22, IECEx Zone 2/22, EAC, Merchant Navy

Profinet / EtherNet-IP Deterministic Networks and Firmware Flash Compatibility

The BMEP585040C processor operates within the Modicon M580 Ethernet based PAC architecture using integrated Ethernet TCP/IP communication channels. The module supports service communication, device network communication, and HSBY Ethernet connections for system synchronization. Its firmware environment supports expandable flash storage management and application data handling through compatible Schneider Electric programming tools.

The processor executes control tasks with instruction processing capability up to 40 Kinst/ms with mixed Boolean and fixed arithmetic operations, or 50 Kinst/ms with Boolean operations. The module supports application structures including fast periodic tasks, auxiliary tasks, event tasks, and cyclic master tasks.

Frequently Asked Questions

Q: What type of I/O architecture does the BMEP585040C support?
A: The processor supports Modicon X80 local I/O and remote I/O configurations with up to 5120 discrete and 1280 analog local I/O channels.

Q: Does the module support redundant Ethernet communication?
A: The module provides Ethernet HSBY port connectivity for hot standby architectures and supports Ethernet communication services through dedicated ports.

Q: What environmental protection is provided for the circuit board?
A: The processor uses conformal coating on the circuit board to support operation in environments with gas, dust, salt, and humidity resistance requirements.

Field Installation Guidelines

Install the BMEP585040C processor in the designated Modicon M580 rack position with the rack power supply correctly connected. Verify that the backplane connection is fully engaged before applying system power.

Route Ethernet communication cables separately from high-voltage power conductors to reduce electromagnetic interference. Apply appropriate cable shielding and connect shields according to the plant grounding practice.

Confirm that the processor firmware version is compatible with the installed EcoStruxure Control Expert software environment before downloading application programs. Check RUN, ERR, I/O, DL, BACKUP, and Ethernet status LEDs during commissioning to verify processor state and communication conditions.

---