ATV630C13N4

Configured for variable-frequency motor control in the Altivar Process ATV600 platform, the Schneider Electric ATV630C13N4 (ATV630 variable speed drive) provides three-phase AC conversion for asynchronous and synchronous motors. The drive accepts 380 to 480 V AC input and provides up to 500 Hz output frequency, with Ethernet / Modbus TCP and Modbus serial communication integrated.

Hardware Specifications

Parameter	Specification
Model	ATV630C13N4
Brand	Schneider Electric
Series	Altivar Process ATV600 / ATV630
Product Type	Variable Speed Drive
Origin	Not specified in supplied data
Rated Supply Voltage	380 to 480 V AC, 3-phase, -15% / +10%
Supply Frequency	50 / 60 Hz, +/-5%
Motor Power, Normal Duty	130 kW / 200 HP
Motor Power, Heavy Duty	110 kW / 150 HP
Continuous Output Current, Normal Duty	250 A at 2.5 kHz
Continuous Output Current, Heavy Duty	211 A
Output Frequency Range	0.1 Hz to 500 Hz
Degree of Protection	IP00 / UL Open Type
Apparent Power	179 kVA at 480 V
Prospective Line Isc	50 kA
Communication	Ethernet / Modbus TCP, Modbus Serial
Optional Communication	Profibus DP V1, Profinet, DeviceNet, CANopen, Ethernet/IP
Integrated EMC Filter	Yes
DC Choke	Integrated
Safe Torque Off	SIL 3 / Pl e
Cooling Method	Forced convection
Weight	0.82 kg
Dimensions	320 mm x 852 mm x 390 mm

Industrial Drive and Communication Characteristics

The ATV630C13N4 uses variable-frequency output control for three-phase asynchronous and synchronous motors. The stated output range of 0.1 Hz to 500 Hz covers low-speed operation through high-frequency motor control conditions.

Ethernet / Modbus TCP and Modbus serial communication are integrated. Optional communication interfaces include Profibus DP V1, Profinet, DeviceNet, CANopen, and Ethernet/IP. These interfaces provide the control-system communication paths specified for the drive configuration.

The drive incorporates an EMC filter, DC choke, and Safe Torque Off function rated SIL 3 / Pl e. Forced convection is used for thermal management. The IP00 / UL Open Type enclosure classification requires installation within an appropriate enclosure or protected assembly according to the applicable installation requirements.

Frequently Asked Questions

Q: What motor types are supported by the ATV630C13N4?

A: The supplied data specifies operation with three-phase asynchronous and synchronous motors.

Q: What are the continuous output current ratings?

A: The drive is rated at 250 A at 2.5 kHz in Normal Duty and 211 A in Heavy Duty operation.

Q: Which communication interfaces are integrated?

A: Ethernet / Modbus TCP and Modbus serial communication are integrated. Profibus DP V1, Profinet, DeviceNet, CANopen, and Ethernet/IP are listed as optional communication interfaces.

Field Installation Guidelines

Install the drive in an enclosure or protected assembly compatible with its IP00 / UL Open Type classification. Maintain the mechanical clearances required by the applicable Schneider Electric installation documentation and ensure that forced-convection airflow is not obstructed.

Route incoming AC power, motor conductors, and communication wiring separately where required by the installation design. Use appropriate protective earthing and cable shielding practices for the EMC environment. The integrated EMC filter and DC choke should be considered when designing the upstream power and motor-cable arrangement.

Verify the supply voltage, phase configuration, motor rating, duty classification, output current requirement, and communication interface before energization. The Safe Torque Off circuit must be wired according to the applicable safety architecture and drive documentation. Do not treat STO as electrical isolation for maintenance; isolate the power source using the prescribed disconnecting procedure.

---