ABFTE20SP200

Configured for discrete output interconnection between Twido controllers and preactuator wiring, the Schneider Electric ABFTE20SP200 (ABFTE20SP200 connection cable) provides direct electrical connection through two HE10 interfaces. The cable is specified for TWDDDO16TK and TWDDDO32TK discrete output modules, with a 2 m cable length and 28 AWG conductors.

Hardware Specifications

Parameter	Specification
Model	ABFTE20SP200
Brand	Schneider Electric
Product Range	Twido
Product Type	Discrete output connecting cable
Accessory Type	Discrete output pre-formed cable
Application	Twido discrete output connection
Compatible Modules	TWDDDO16TK, TWDDDO32TK
Cable Length	2 m
Conductor Gauge	28 AWG
Cable Cross Section	0.08 mm2
Electrical Connections	1 x HE10 20-pin preactuator side; 1 x HE10 20-pin Twido side
Weight	0.14 kg
Dimensions	Not specified for the cable assembly
Operating Temp	Not specified
Power Consumption	Not applicable; passive cable assembly
Country of Origin	Thailand
Application Restriction	For applications other than use of Advantys Telefast ABE7 sub-base

Twido Discrete Output Interface

The ABFTE20SP200 provides a pre-formed connection between compatible Twido discrete output modules and external preactuator wiring. The interface uses HE10 20-pin connectors on both cable ends, maintaining the defined connector arrangement for the supported TWDDDO16TK and TWDDDO32TK modules.

The 28 AWG conductors have a specified cross section of 0.08 mm2. Cable length is fixed at 2 m, so installation routing must remain within the available physical cable reach without applying excessive tensile force to either connector.

Frequently Asked Questions

Q: Which Twido modules are specified for use with the ABFTE20SP200?
A: Schneider Electric specifies compatibility with TWDDDO16TK and TWDDDO32TK discrete output modules.

Q: What connector arrangement does this cable use?
A: The assembly has one HE10 20-pin connector for the preactuator side and one HE10 20-pin connector for the Twido side.

Q: Is the ABFTE20SP200 an active electronic device?
A: No. It is a passive connecting cable and therefore has no specified power consumption.

Field Installation Guidelines

• Verify the module reference before installation and confirm compatibility with TWDDDO16TK or TWDDDO32TK.
• Inspect both HE10 connectors for damaged contacts, contamination, or mechanical deformation before mating.
• Route the 2 m cable without sharp bends, excessive tension, or mechanical loading on the connector bodies.
• Keep discrete output wiring separated from high-energy power conductors where practical to reduce electrical interference.
• Maintain proper cabinet wiring segregation between control signals and switching circuits according to the installation standard.
• Do not modify the pre-formed cable, connector pin arrangement, or conductor termination unless the applicable Schneider Electric documentation explicitly permits modification.
• Secure the cable so vibration and repeated movement do not transfer mechanical stress to the HE10 connectors.
• Verify connector seating before energizing the associated discrete output circuit.
• For shielded surrounding wiring, terminate shields according to the system grounding design rather than relying on the cable connector for protective grounding.

---