MVI56-DNP

Product Overview

The MVI56-DNP is a ProSoft DNP 3.0 Master/Slave Communication Module for ControlLogix, supporting DNP 3.0 protocol in master or slave mode for SCADA and utility applications.

Backplane Current Load

• @ 5V DC: 800 mA
• @ 24V DC: 3 mA

Temperature

• Operating: 0°C to 60°C (32°F to 140°F)
• Storage: –40°C to 85°C (–40°F to 185°F)

Shock & Vibration

• Shock (Operational): 30 g
• Shock (Non‑operational): 50 g
• Vibration: 5 g from 10 Hz to 150 Hz

Relative Humidity

• 5% to 95% (non‑condensing)

LED Indicators

• Module Status
• Backplane Transfer Status
• Application Status
• Serial Activity

Debug/Configuration Port (CFG)

• Connector: RJ45 (DB‑9M with supplied cable)
• Type: RS‑232 only

Application Ports (PRT1 & PRT2)

• Full hardware handshaking control for radio, modem, and multi‑drop support
• Connector: RJ45 (DB‑9M with supplied cable)
• RS‑232 Handshaking: Configurable
• Isolation: 500V Optical isolation from backplane

Software Configurable Communication Parameters

• Baud Rate: 110 to 115,200 baud (depending on protocol)
• RS‑232/485/422: Supported
• Parity: None, odd, or even
• Data Bits: 5, 6, 7, or 8
• Stop Bits: 1 or 2
• RTS On/Off Delay: 0 to 65,535 ms

Included Accessories

• RJ45 to DB‑9M cables for each port
• 6‑foot RS‑232 configuration cable

---