5604-RIO-PDPMV1

Product Overview

The ProSoft 5604-RIO-PDPMV1 is a high-performance, single-slot embedded communication module designed to bridge legacy Allen-Bradley Remote I/O (RIO) systems with PROFIBUS DP Master V1 networks.

Technical Specifications

• Protocol Support: PROFIBUS DP-V0 and DP-V1 (Class 1 and Class 2 Master functionality).
• Data Transfer: Supports cyclic data exchange (DP-V0) and acyclic data exchange (DP-V1 for diagnostics/configuration).
• Baud Rates: Auto-baud detection or manual configuration from 9.6 kbps up to 12 Mbps.
• Supported Slaves: Up to 124 slave devices can be connected.
• Max Config Data Length: 244 bytes of Input and 244 bytes of Output data per slave.
• Physical Port: 9-pin female D-Sub (DB9) connector with standard PROFIBUS pinout.
• Network Compatibility: Fully compatible with Allen-Bradley Remote I/O networks.
• Supported Baud Rates: 57.6 kbps, 115.2 kbps, and 230.4 kbps.
• Rack Emulation: Supports full, half, and quarter rack configurations.
• I/O Addressing: Standard block transfer read (BTR) and block transfer write (BTW) mechanisms to interface with the host PLC memory map.
• Form Factor: Single-slot module (typically integrated into standard ProSoft generic platforms or specific chassis depending on the exact sub-series mounting).
• Operating Temperature: 0°C to 60°C (32°F to 140°F).
• Storage Temperature: -40°C to 85°C (-40°F to 185°F).
• Relative Humidity: 5% to 95% RH (non-condensing).
• LED Indicators: Status LEDs for Module Status, RIO Network Status, and PROFIBUS Network Status/Activity.
• Configuration Port: RS-232 serial port (RJ45 connector) or Ethernet (depending on hardware revision) for configuration and diagnostics.
• Software Tool: Configured via ProSoft Configuration Builder (PCB) or dedicated PROFIBUS configuration software (such as ProSoft's ProTalk/ProSoft fdt/DTM tools) for setting up the PROFIBUS GSD files.