PLX32-MBTCP-PND

Product Overview

The PLX32-MBTCP-PND is a ProSoft Modbus TCP/IP to PROFINET Device Gateway providing data exchange between Modbus TCP/IP and PROFINET networks.

Modbus TCP/IP Specifications

• Supported Modbus Function Codes: 1, 2, 3, 4, 5, 6, 15, 16, 22 (Slave Only), 23 (Slave Only)
• Supported Clients: 10
• Supported Servers (MBAP): 5
• Encapsulated Servers: 5
• Command List: Up to 160 fully configurable Client commands
• Status Data: Error codes reported individually for each command
• Command List Polling: Each command individually enabled/disabled; write‑only‑on‑data‑change available

PROFINET Specifications

• Driver Type: Class A Device
• PROFINET I/O Data: 1440 bytes IN, 1440 bytes OUT
• Exchange Types: Cyclic Real‑time (RT) and Acyclic Data

Power Supply

• Nominal Voltage: 24V DC
• Allowed Range: 10 to 36V DC
• Terminals: Positive, Negative, GND
• Current Load: 24V DC nominal @ 300 mA; 10‑36V DC @ 610 mA max

Temperature & Humidity

• Operating Temperature: –25°C to +70°C
• Storage Temperature: –40°C to +80°C
• Relative Humidity: 5% to 95% RH (non‑condensing)

Shock & Vibration

• Shock (Operational): IEC 60068‑2‑27; 15G @ 11ms, 3‑Axis
• Shock (Non‑Operational): IEC 60068‑2‑27; 30G @ 18ms, 3‑Axis
• Vibration: IEC 60068‑2‑6; 5G @ 10Hz to 150Hz

Dimensions

• H × W × D: 5.38 × 1.99 × 4.38 in (13.67 × 5.05 × 11.13 cm)

LED Indicators

• Configuration (CFG) and Error (ERR) Status
• Power (PWR) and Hardware Fault (FLT)
• Network Status (NS) – Modbus TCP Class I or Class III Connection Status
• Module Status (MS) – Module Configuration Status
• Ethernet Communication Port Link/Activity and 100 Mbit

Ethernet Ports

• Type: 2 × 10/100 Mbit full‑ and half‑duplex RJ45
• Electrical Isolation: 1500 Vrms at 50‑60 Hz for 60 seconds per IEC 60950
• Broadcast Storm Resiliency: ≤ 5000 ARP frames‑per‑second and ≤ 5 minutes duration

Included Accessories

• 2.5 mm screwdriver
• J180 Power Connector

---