BMXDDO1602H

Product Overview

BMXDDO1602H is Modicon X80 discrete output module is designed for reliable operation in severe environments.

Technical Specifications

Output:
• Discrete output number: 16 (EN/IEC 61131-2)
• Discrete output logic: Positive
• Discrete output voltage: 24 V (19…30 V DC)
• Discrete output current: 0.5 A
• Output compatibility: IEC 61131-2 type 3 DC input
• Current per channel: 0.625 A
• Current per module: <= 10 A
• Leakage current: <= 0.5 mA at state 0
• Residual voltage [Ures]: 1.2 V at state 1
• Response time on output: 1.2 ms
• Paralleling of outputs: Yes, up to 2

Protection:
• External short-circuit protection
• Overload protection
• Overvoltage protection
• Reverse polarity protection (reverse mounted diode)
• Output overload protection: Current limiter, electronic circuit breaker 1.5 In < Id < 2 In
• Output overvoltage protection: Transil diode
• Output short-circuit protection: 2 A external fuse

Electrical:
• Typical current consumption: 79 mA at 3.3 V DC
• Power dissipation: <= 4 W
• Voltage detection threshold: <14 V DC preactuator fault, >18 V DC preactuator at state 0
• Tungsten load: <= 6 W
• Switching frequency: 0.5/LI² Hz
• Load impedance (ohmic): >48 Ω
• MTBF reliability: 392,285 h

Indicators:
• 1 LED (green) module operating (RUN)
• 1 LED per channel (green) channel diagnostic
• 1 LED (red) module I/O
• 1 LED (red) module error (ERR)

Environment:
• IP degree of protection: IP20
• Operating temperature: -25…70 °C
• Storage temperature: -40…85 °C
• Relative humidity: 5…95 % without condensation at 55 °C
• Operating altitude: 0…2000 m; 2000…5000 m with derating factor
• Vibration resistance: 3 gn
• Shock resistance: 30 gn
• Protective treatment: Conformal coating
• Environmental characteristics: Gas resistant class Gx, 3C4; Dust resistant class 3S4; Sand resistant class 3S4; Salt resistant level 2; Mold and fungal spore resistant class 3B2

Certifications & Standards:
• Directives: 2012/19/EU (WEEE), 2014/30/EU (EMC), 2014/35/EU (Low Voltage)
• Certifications: RCM, CSA, CE, IEC-Ex, EAC, Merchant Navy, UL, ATEX
• Standards: EN 61000-6-2, EN 61010-2-201, EN 61000-6-4, EN 61131-2
• Dielectric strength: 1500 V AC output/ground and output/internal logic, 50/60 Hz, 1 min

Mechanical:
• Product weight: 0.12 kg

---