BMXCRA31210

Overview

BMXCRA31210 is a Schneider Modicon X80 remote IO drop module with EtherNet/IP communication, advanced diagnostics, and flexible network features for industrial automation systems.

Communication & Network

• Bus Type: Bus X across remote backplane

• Ports: 3 (1 service, 2 Ethernet RIO network with RSTP)

• Protocol: EtherNet/IP adapter, Modbus TCP server for diagnostics

• IP Version: IPv4

• Network Features:

• RSTP ring topology

• QoS (Quality of Service)

• DHCP, TFTP, FTP, FDR, SNTP clients

• SNMP agent

• Syslog protocol support

• Cybersecurity: Enable/disable ports

• Connector: 3 × RJ45

• Transmission Rate: 10/100 Mbit/s (10/100BASE-TX)

• Exchange Modes: Half duplex, full duplex, autonegotiation, auto MDIX

Functions & Diagnostics

• CCOTF (Configuration Change on the Fly)

• Input data collected and published to remote I/O head adapter

• Output modules updated from remote I/O head adapter

• Remote device diagnostics (Device DDT)

• Port mirroring

• System time stamping with 10 ms resolution

• I/O extension rack support

• Non-interfering type 1

Indicators & Status LEDs

• Green RUN LED (module active)

• Red ERR LED (module error)

• Green/Red Module status LED

• Green/Red Network status LED

• Green Ethernet link diagnostics LED (STS)

Electrical & Environmental

• Current Consumption: 1200 mA at 3.3 V DC

• Power Supply Voltage: 3.3 V DC

• Relative Humidity: 95% without condensation

• Maximum Altitude (Transport): 3000 m (9842.5 ft)

Compatibility & Physical

• Compatible Modules: Discrete (0–1024 ch), Analog (0–256 ch), counter, time-stamping, SSI encoder interface, motion control, frequency input, AS-Interface, serial link, fiber converters

• Mounting: Rack-mounted, fixed by screws

• Dimensions:

• Width: 32 mm (1.3 in)

• Height: 100 mm (3.9 in)

• Depth: 87.5 mm (3.4 in)

• Weight: 0.225 kg (0.496 lb)

---