IC698CPE010-FL

Description

IC698CPE010-FL is a GE Fanuc RX7i Series CPU module designed for real-time industrial control with embedded serial and Ethernet communications.

Core Specifications

• Processor: 300 MHz Intel Celeron

• Memory: 10 MB RAM (battery-backed), 10 MB flash (non-volatile)

• Floating Point Support: Yes

• Boolean Execution Speed: 0.33 ms per coil

Communication Interfaces

• Serial Ports: 3

• Serial Protocols: Modbus RTU Slave, SNP, Serial I/O

• Embedded Interfaces: RS-232, RS-485, Ethernet (2 ports)

• Web Monitoring: Supported

• Bit-in-Word & Symbolic Variables: Supported

Operation & Configuration

• Run/Stop Control: Three-position switch or PC-based software

• Programming Software: Proficy Machine Edition PLC-Logic Developer

• Firmware: Stored in flash, field-upgradable

• Security: Password-protected configuration data

• Connection Requirements:

• Ethernet: IP addressing, Cat5 cable

• Serial: SNP protocol

Installation Notes

• Rack Position: Slot 1 (dedicated CPU slot)

• MAC Address: Record before installation

• Power: Disable before installation, then re-enable after connections

• Battery: CMOS battery required for memory retention

• Grounding: Must be securely grounded in rack

---