{"product_id":"yokogawa-snt501-13-optical-esb-bus-repeater-module","title":"Yokogawa SNT501-13 Optical ESB Bus Repeater Module","description":"\u003cp\u003eThe \u003cstrong\u003eYokogawa SNT501-13\u003c\/strong\u003e is an Optical ESB Bus Repeater Slave Module for Yokogawa safety control systems. It converts the ESB bus communication path to an optical link and provides the slave-side interface back to the ESB bus. The module supports star and chain connection methods, with up to two repeater stages and a standard total transmission distance of up to 5 km.\u003c\/p\u003e\n\u003ch3\u003eOptical ESB Bus Function\u003c\/h3\u003e\n\u003cp\u003eSNT501 operates on the slave side of an optical ESB bus connection. It receives the optical transmission from an SNT401 Optical ESB Bus Repeater Master Module or an N-ESB Bus Module, then connects through ESB bus cable to the SSB401 ESB Bus Interface Module on the safety node unit. This arrangement allows the ESB communication path to cross a fiber-optic section rather than relying entirely on copper bus cabling.\u003c\/p\u003e\n\u003ch3\u003eNetwork Configuration\u003c\/h3\u003e\n\u003cp\u003eThe repeater supports both \u003cstrong\u003estar and chain\u003c\/strong\u003e connection methods. Up to two connecting stages can be used. For the SNT401\/SNT501 combination, the specified transmission distance is up to 5 km for two stages in the applicable configuration; Yokogawa documentation also specifies up to 10 km for Vnet\/IP systems with R1.03 or later under the stated two-stage condition. \u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSNT501-13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eOptical ESB Bus Repeater Slave Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eESB Bus optical transport function\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection Method\u003c\/td\u003e\n\u003ctd\u003eStar type; Chain type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Connecting Stages\u003c\/td\u003e\n\u003ctd\u003eMaximum 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Distance\u003c\/td\u003e\n\u003ctd\u003eMaximum 5 km, total two stages\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtended Distance with Vnet\/IP R1.03 or Later\u003c\/td\u003e\n\u003ctd\u003eMaximum 10 km, total two stages\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Consumption\u003c\/td\u003e\n\u003ctd\u003e0.5 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eFiber-Optic Communication\u003c\/h3\u003e\n\u003cp\u003eThe SNT501 is used with the corresponding optical repeater arrangement to extend the ESB bus through fiber-optic cable. Yokogawa documentation specifies quartz singlemode fiber for the optical ESB repeater system, with the SNT401\/SNT501 combination supporting a maximum fiber-optic cable length of 5 km. The optical connector is specified as Type LC in the installation documentation.\u003c\/p\u003e\n\u003ch3\u003eSystem Connection\u003c\/h3\u003e\n\u003cp\u003eThe SNT501 is the slave-side counterpart to the SNT401 Optical ESB Bus Repeater Master Module. In a typical ESB optical link, the master-side equipment converts the electrical ESB bus signal to an optical transmission, while the SNT501 receives the fiber signal and returns it to the ESB bus connection at the slave-side node.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is SNT501-13 a master or slave optical repeater?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: SNT501 is the \u003cstrong\u003eOptical ESB Bus Repeater Slave Module\u003c\/strong\u003e. The SNT401 is the corresponding master module used at the other end of the optical ESB link.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the maximum transmission distance of the SNT501 system?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: The standard SNT401\/SNT501 arrangement supports up to 5 km over the specified optical link, with a maximum of two connecting stages. For Vnet\/IP systems with R1.03 or later, Yokogawa specifies up to 10 km for two stages under the stated configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can SNT501 be used in both star and chain configurations?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Yes. The specified connection methods include both star-type and chain-type connections, allowing the repeater to be incorporated into either topology where the system configuration permits it. \u003c\/p\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":69383812940018,"sku":"SNT501-13","price":245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/5589\/5794\/files\/SNT501-53__2.jpg?v=1766976189","url":"https:\/\/www.petrospare.com\/products\/yokogawa-snt501-13-optical-esb-bus-repeater-module","provider":"Petro Spare Industrial Limited","version":"1.0","type":"link"}