{"product_id":"yokogawa-nfai135-s50-ccc01-8-channel-analog-input-module","title":"Yokogawa NFAI135-S50\/CCC01 8-Channel Analog Input Module","description":"\u003cp\u003eThe Yokogawa NFAI135-S50\/CCC01 is an 8-channel isolated analog input module designed to receive 4-20 mA signals from field transmitters. It converts individual process current signals into input data for the STARDOM FCN autonomous controller. Each channel is isolated from the system and other channels. This ordering configuration includes a connector cover for the MIL cable connection.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNFAI135-S50\/CCC01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eIsolated Analog Input Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Channels\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Signal\u003c\/td\u003e\n\u003ctd\u003e4-20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Isolation\u003c\/td\u003e\n\u003ctd\u003eIsolated between channels and system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAllowable Input Current\u003c\/td\u003e\n\u003ctd\u003e25 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Resistance (Power ON)\u003c\/td\u003e\n\u003ctd\u003e250 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Resistance (Power OFF)\u003c\/td\u003e\n\u003ctd\u003e500 kOhm or more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e+\/-0.1% of full scale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Refresh Cycle\u003c\/td\u003e\n\u003ctd\u003e10 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Step Response Time\u003c\/td\u003e\n\u003ctd\u003e100 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmitter Power Supply\u003c\/td\u003e\n\u003ctd\u003e20.2 to 29.3 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOvercurrent Protection\u003c\/td\u003e\n\u003ctd\u003eProvided\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Current Consumption\u003c\/td\u003e\n\u003ctd\u003e360 mA (5 V DC), 450 mA (24 V DC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal Connection\u003c\/td\u003e\n\u003ctd\u003eMIL connector cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWithstanding Voltage\u003c\/td\u003e\n\u003ctd\u003e500 V AC for 1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e32.8 x 107.5 x 130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eAnalog Input Processing and Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe NFAI135 receives standard 4-20 mA current signals from field transmitters and converts them into digital measurement values for controller processing. Its eight input channels allow multiple process variables to be monitored through one module.\u003c\/p\u003e\n\u003cp\u003eIndividual channel isolation separates field input circuits from one another and from the system side. The specified withstand voltage is 500 V AC for one minute, both between input and system and between channels. This isolation arrangement is relevant when field devices have different electrical reference potentials.\u003c\/p\u003e\n\u003ch3\u003eInput Accuracy and Response Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe module has a specified input accuracy of +\/-0.1% of full scale, with a 10 ms data refresh cycle and a 100 ms input step response time. These parameters describe different aspects of signal acquisition: the accuracy indicates measurement deviation relative to the configured full-scale range, while the refresh cycle determines how frequently updated input data is made available.\u003c\/p\u003e\n\u003cp\u003eThe input circuit includes overcurrent protection and has a nominal input resistance of 250 Ohm when powered. The maximum allowable input current is 25 mA, which should be considered when checking transmitter output conditions and loop wiring.\u003c\/p\u003e\n\u003ch3\u003eOrdering Code and Connector Configuration\u003c\/h3\u003e\n\u003cp\u003eThe complete ordering number identifies the module configuration and its connection accessory.\u003c\/p\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNFAI135\u003c\/td\u003e\n\u003ctd\u003e8-channel isolated 4-20 mA analog input module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e-S\u003c\/td\u003e\n\u003ctd\u003eStandard type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003eWithout explosion protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003ctd\u003eBasic type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\/CCC01\u003c\/td\u003e\n\u003ctd\u003eConnector cover for MIL cable, model NFCCC01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003cp\u003eThe \/CCC01 option specifies a connector cover rather than an additional signal-processing function. It should be considered when checking the physical connection arrangement and replacement requirements.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How many analog input signals can the NFAI135-S50\/CCC01 handle?\u003c\/p\u003e\n\u003cp\u003eA: It supports eight independent 4-20 mA input channels. Each channel has individual isolation from the other channels and the system.\u003c\/p\u003e\n\u003cp\u003eQ: Does the NFAI135-S50\/CCC01 support HART communication?\u003c\/p\u003e\n\u003cp\u003eA: The specified -S suffix identifies the standard type. Yokogawa identifies the -H suffix as the HART communication version. Therefore, this -S50 configuration should not be identified as a HART version.\u003c\/p\u003e\n\u003cp\u003eQ: What is the function of the \/CCC01 option?\u003c\/p\u003e\n\u003cp\u003eA: \/CCC01 specifies a connector cover for the MIL cable connection, identified by Yokogawa as accessory model NFCCC01. It does not change the module's eight-channel analog input function.\u003c\/p\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":69254192496882,"sku":"NFAI135-S50\/CCC01","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/5589\/5794\/files\/NFAI135-S50CCC01.jpg?v=1794195338","url":"https:\/\/www.petrospare.com\/products\/yokogawa-nfai135-s50-ccc01-8-channel-analog-input-module","provider":"Petro Spare Industrial Limited","version":"1.0","type":"link"}