{"product_id":"yokogawa-aep7d-25-primary-power-supply-bus-unit","title":"Yokogawa AEP7D-25 Primary Power Supply Bus Unit","description":"\u003cp\u003eThe AEP7D-25 is a Yokogawa primary power distribution unit for distributing incoming power to equipment installed in the same control cabinet. It uses a dual-input distribution arrangement, with separate output groups associated with each input supply. The -2 configuration is rated for 220 to 240 V AC input, while the -5 suffix identifies the basic type without explosion protection.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAEP7D-25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003ePrimary Power Supply Bus Unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eCENTUM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Power Supply Voltage\u003c\/td\u003e\n\u003ctd\u003e220 to 240 V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWithstanding Voltage\u003c\/td\u003e\n\u003ctd\u003e1500 V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Current (Unit)\u003c\/td\u003e\n\u003ctd\u003e20 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Input Current (Port)\u003c\/td\u003e\n\u003ctd\u003e6 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Distribution\u003c\/td\u003e\n\u003ctd\u003eDual-input distribution arrangement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistribution Ports\u003c\/td\u003e\n\u003ctd\u003e7 per input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003ePower Distribution Architecture\u003c\/h3\u003e\n\u003cp\u003eThe AEP7D distributes incoming power to equipment installed within the same cabinet. Its two input terminals, TM1 and TM2, supply separate groups of distribution connectors. In the dual-input arrangement, each supply feeds seven corresponding output ports, allowing two independent power sources to serve separate equipment groups.\u003c\/p\u003e\n\u003cp\u003eThe distribution structure also supports a configuration in which the two inputs are connected in parallel, allowing one incoming supply to feed all 14 output ports. This arrangement differs from dual-source operation and should be selected according to the intended cabinet power distribution design.\u003c\/p\u003e\n\u003ch3\u003eModel and Suffix Identification\u003c\/h3\u003e\n\u003cp\u003eThe AEP7D model uses suffix codes to identify its input voltage and protection configuration:\u003c\/p\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAEP7D\u003c\/td\u003e\n\u003ctd\u003ePrimary Power Supply Bus Unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e-2\u003c\/td\u003e\n\u003ctd\u003e220 to 240 V AC input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e-5\u003c\/td\u003e\n\u003ctd\u003eBasic type without explosion protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003cp\u003eThe complete ordering number AEP7D-25 therefore identifies the 220 to 240 V AC input version with the basic, non-explosion-protected configuration.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What is the input voltage requirement for the AEP7D-25?\u003c\/p\u003e\n\u003cp\u003eA: The specified input voltage is 220 to 240 V AC. The maximum input current is 20 A for the complete unit, with a maximum of 6 A per distribution port.\u003c\/p\u003e\n\u003cp\u003eQ: Does the AEP7D-25 support dual power supply connections?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The AEP7D supports two separate power inputs, each feeding its corresponding group of seven distribution ports. The two inputs can also be connected in parallel for single-source distribution to 14 ports.\u003c\/p\u003e\n\u003cp\u003eQ: Is the AEP7D-25 an explosion-protected version?\u003c\/p\u003e\n\u003cp\u003eA: No. The -5 suffix identifies the basic configuration without explosion protection. Explosion-protection requirements should be checked against the applicable AEP7D ordering codes and installation documentation.\u003c\/p\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":69286251135218,"sku":"AEP7D-25","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/5589\/5794\/files\/AEP7D-252.jpg?v=1794381707","url":"https:\/\/www.petrospare.com\/products\/yokogawa-aep7d-25-primary-power-supply-bus-unit","provider":"Petro Spare Industrial Limited","version":"1.0","type":"link"}