{"product_id":"honeywell-fs-gimtldi-1624-digital-input-module","title":"Honeywell FS-GIMTLDI-1624 Digital Input Module","description":"\u003cp\u003eThe Honeywell FS-GIMTLDI-1624, also associated with the FS-GIMTLDI-1624 digital input interface assembly, is specified for acquiring 24 VDC discrete field signals in Honeywell FSC and Safety Manager safety control systems. Its stated 16-channel configuration and galvanic isolation support the electrical interface between field contacts and safety controller inputs.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eFS-GIMTLDI-1624\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to 70 deg C (provided data)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-55 to 85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd\u003e5% to 95%, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Series\u003c\/td\u003e\n\u003ctd\u003eFSC \/ Safety Manager\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eDigital Input Module \/ Galvanic Isolation Interface Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Channels\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Input Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage Range\u003c\/td\u003e\n\u003ctd\u003e18 to 30 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical Input Voltage\u003c\/td\u003e\n\u003ctd\u003e21 to 28 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003eChannel-to-channel \/ channel-to-system galvanic or optical isolation, as described in supplied data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety Integrity Level\u003c\/td\u003e\n\u003ctd\u003eSIL 2 \/ SIL 3 suitability stated in supplied data; exact certification requires verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDIN rail or rack mounting, as described in supplied data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eGalvanic Isolation and Digital Signal Acquisition\u003c\/h3\u003e\n\u003cp\u003eThe stated isolation architecture separates field-side signals from controller-side electronics to limit ground-loop interference and the transfer of electrical disturbances. The 16-channel configuration is intended for discrete signals from switches, proximity sensors, and dry contacts.\u003c\/p\u003e\n\u003cp\u003eThe supplied information also describes diagnostics for signal integrity, loop continuity, and open- or short-circuit conditions. The exact diagnostic coverage, channel isolation ratings, and fault response behavior should be verified against the manufacturer documentation for the specific assembly.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: What field signal voltage does the FS-GIMTLDI-1624 support?\u003c\/p\u003e\n\u003cp\u003eA: The supplied specifications state a nominal input voltage of 24 VDC, with an operating input range of 18 to 30 VDC.\u003c\/p\u003e\n\u003cp\u003eQ: Can the module be replaced while the system is energized?\u003c\/p\u003e\n\u003cp\u003eA: Hot-swap capability is not confirmed by the supplied data. Verify the applicable Safety Manager or FSC hardware installation manual before removing or replacing the assembly.\u003c\/p\u003e\n\u003cp\u003eQ: What should be checked when connecting field inputs?\u003c\/p\u003e\n\u003cp\u003eA: Confirm terminal assignments, input polarity, field supply voltage, and the specified isolation arrangement. Verify that field wiring and grounding follow the system installation documentation.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the complete part number and hardware revision against the installed FSC or Safety Manager configuration.\u003c\/li\u003e\n\u003cli\u003eVerify mounting compatibility with the intended DIN rail or rack assembly.\u003c\/li\u003e\n\u003cli\u003eCheck field input voltage and terminal assignments before energizing the circuit.\u003c\/li\u003e\n\u003cli\u003eRoute discrete signal wiring separately from high-voltage and high-current conductors where practical.\u003c\/li\u003e\n\u003cli\u003eApply cable shielding and grounding according to the manufacturer's installation instructions.\u003c\/li\u003e\n\u003cli\u003eVerify channel status and fault diagnostics during commissioning.\u003c\/li\u003e\n\u003cli\u003eConfirm approved replacement procedures before disconnecting or removing installed hardware.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":67785117827314,"sku":"FS-GIMTLDI-1624","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/5589\/5794\/files\/FS-GIMTLDI-16242.jpg?v=1792376086","url":"https:\/\/www.petrospare.com\/products\/honeywell-fs-gimtldi-1624-digital-input-module","provider":"Petro Spare Industrial Limited","version":"1.0","type":"link"}